0
What else can I help you with?
Fuel Pressure Regulator ?
form_title= Fuel Pressure Regulator form_header= Keep your fuel pressure regulated. What model do you need?*= _ [50] Do you want the fuel pressure new or used?*= () New () Used () Either Have you ever used a regulator before?*= () Yes () No
Where can you find the fuel pressure regulator?
Need to know the year, make, model and engine size to answer that one.
Would a fuel pressure regulator leak gas into the crank case?
Depending what year, make and model you have, yes.
Where is the fuel pressure regulator located2002 silverado 6.0 liter?
REMOVAL PROCEDUREIMPORTANT: Three styles of fuel pressure regulators and fuel rails will be used in this model year. Each regulator has a different footprint that consequently changes the size of the receiving port on the fuel rail. The regulator retaining clips are specific to each rail-regulator design and cannot be interchanged.Remove the engine sight shield.Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.Disconnect the fuel pressure regulator vacuum line.Clean any dirt from the fuel pressure regulator retainer and the surrounding area.Remove the fuel pressure regulator retainer (8).Remove the fuel pressure regulator (9).Ensure none of the following parts are still in the fuel rail:Backup ring (10)Regulator seal O-ring (11)Regulator filter (12)Regulator seal O-ring (13)INSTALLATION PROCEDUREEnsure that the NEW fuel pressure regulator retainer is the correct one.The tabs (1) are used on the straight vacuum port retainer (2), and the E85 straight vacuum port retainer (3).The angle vacuum port retainer (4) has no tabs.Install the following parts onto the fuel pressure regulator (9), if necessary:Backup ring (10)Regulator seal O-ring (11)Regulator filter (12)Regulator seal O-ring (13)Lubricate the fuel pressure regulator O-rings (11,13) with clean engine oil.Install the fuel pressure regulator (9).IMPORTANT: Whenever the fuel pressure regulator is removed from the fuel rail, NEW O-rings and NEW retaining clips should be used on reinstallation.Install the NEW fuel pressure regulator retainer (8).Connect the fuel pressure regulator vacuum line.Tighten the fuel fill cap.Inspect for leaks.10.1.Turn ON the ignition with the engine OFF, for 2 seconds.10.2.Turn OFF the ignition for 10 seconds .10.3.Turn ON the ignition, with the engine OFF.10.4.Inspect for fuel leaks. Install the engine sight shield.
Where is the fuel pressure regulator on a 1997 dodge stratus?
Location of the fuel pressure regulator on a 1997 Dodge Stratus
Where is the fuel pressure regulator on a Lincoln LS?
I believe it is on the end of the fuel rail if you are talking about the V6 model I'm not quite sure where it is on the V8 models.
What is the difference between Red gas grill regulator and silver?
The color of the gas grill regulator does not affect its function; it's just a cosmetic difference. Both red and silver regulators serve the same purpose of controlling the flow and pressure of gas to the grill burners. It is important to ensure that the regulator is compatible with your specific grill model and can handle the gas pressure needed for proper operation.
Where is fuel pressure regulator valve on land rover discovery 2?
In the Land Rover Discovery 2, the fuel pressure regulator is typically located on the fuel rail, which is situated on the engine's intake manifold. To access it, you may need to remove the engine cover and other components depending on your specific model and engine configuration. The regulator is designed to maintain consistent fuel pressure to the injectors. Always refer to the vehicle's service manual for exact location and procedures.
Where is fuel pressure regulator located on 95 jeep grand cherokee 4.0?
These vehicles only run a one-line fuel system meaning that the fuel pressure regulator is part of the fuel sender--fortunately on these vehicles they combine the fuel pressure regulator and fuel filter into one assembly--which is changeable, but the fuel tank has to be lowered to be accessed--I assume the vehicle is starting hard when cold--common problem with these vehicles--if taken to a dealer mechanic, they will probably tell you replacement of the entire sending unit is necessary--which is not true--
How to replace head gasket?
1) Determine make, model, and year of vehicle in question. 2) Obtain appropriate shop manual and appropriate gasket. 3) Follow instructions, which will likely include: 3a) Remove head 3b) Remove old gasket 3c) Install new gasket 3d) Replace head 4) Relax and enjoy a homebrew.
Where is the voltage regulator for an alternator located on a 1999 Saturn sl2?
The voltage regulator is in the alternator on that model vehicle
Is there a replacement for Mirro gasket pressure cooker model?
The rubber gasket in the lid between the lid and the pot? Yes, it is availible. Anyplace that sells the cooker should have the gasket. Type Mirro Pressure Cooker seal in the search engine and I think that will give you a source.
