answersLogoWhite

0

You can make 9 triangles but NOT rectangles.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Instructions on how to make popsicle stick bridges?

Use a truss design. Remember to use lots of triangles as they are the strongest geometrical shape, and also, if you are just testing only the strongest Popsicle stick bridge, use many reinforced Popsicle sticks (two or more popsicle sticks laid on-top of each other). Make your bridge as symmetrical as possible, as this well help your bridge endure more surface and joint tension.If you are using popsicle sticks for your deck as well, you should probably double layer it, then add a zigzag or triangles pattern of sticks on the bottom the deck, to further reinforce it. When you make joints with your popsicle sticks, make it look something like this: --------_______-------- <stick layout keep that pattern consistent, with out laying them in a stair type pattern. Think of those small sturdy bridges with wide, geometrical beams.


How do you make a popsicle stick bridge that can hold 110 pounds without breaking the stick in anyways and only using white glue?

Use a lot of sticks.


What crafts can you uses Popsicle sticks for?

There are a lot of things you can do with popsicle sticks. One of my favorites is a popsicle stick box. Here is how to make it. You need white glue and popsicle sticks. So you have probably heard of Lincoln Logs. If you haven't, Google it. Look at how the pieces are stacked on top of each other. Do this with your popsicle sticks, but of course your popsicle sticks won't have indents in them, so you have to glue them together instead. There should be small spaces between each popsicle stick after you glue them. It is okay if they aren't perfectly straight up and down. Okay now you fit some popsicle sticks into the empty spots. First put a line of glue down the lower sides, and glue them on. When it is dry you can flip it over and make the top. Do the same thing as you did on the bottom, but only put the glue on one side. While that part is drying you might want to add some glue to the very edge to act as hinges. Also why it is drying you may need to rub some glue on top to get the lid to stay together. Open the box once in a while, even if you need to force it. If you do that, the lid should work right when it is ready. If you want to you can paint it or decorate it in any way you want. It looks really cool if you look through the sides of it!


Why do only some three sticks make a triangle?

A triangle only has three sides. If you put three sticks together, you can make a triangle. If you had four sticks, you cannot make a triangle. That is why only three sticks are needed.


You can make this number of tiles into only 2 rectangles?

four


How long has the popsicle existed?

As long as there has been ice cream and sticks : ) In 1905, the Popsicle was invented by an eleven-year-old Frank Epperson. Frank Epperson was only 11 years old when he invented the originally named Epsicle. He had left his fruit flavored soda outside on the porch with a stir stick in it. The drink froze to the stick and tasted good. It took 18 more years in 1923 for Epperson to apply for a patent for a "frozen ice on a stick" called the Epsicle ice pop, which his children re-named the Popsicle. In 1925, Frank Epperson sold his famous Popsicle to the Joe Lowe Company of New York. Good Humor now owns the rights to the Popsicle. * Twin Popsicles (two popsicles sticks together) were invented during the Great Depression. * Popsicle sticks were first made from Birch wood.


How do you make a boomerang out of one popsicle stick?

You'll need your choice of juice, an ice tray, saran wrap, and toothpicks. First, make your juice by following the instructions on the can. Second, slowly pour the juice into the clean ice tray. Next, tightly wrap the ice tray in saran wrap. Finally, stick the toothpicks in the middle of each Popsicle. Now, freeze the particles in a freezer from 3-4 hours, or overnight if you want. Once frozen, take off saran wrap. When taking off saran wrap the toothpicks may come out. Just simply stick them back in. Twist the ice tray back and forth until the Popsicle break from the tray. Take them out and enjoy!


How do you make a ferris wheel out of popsicle sticks?

You will need glue, razor blades and a picture to guide you. (Oh, I'm also assuming you are going to be making a Dutch type of windmill....) Can you only use popsicle sticks? If not, add toothpicks and paper clips to your list. Toothpicks are great for adding detail and for using as supports. The paper clip can be opened to help support the blades so that they will spin. You can make the base square or to be fancy a pentagon or octagon! -Begin by drawing the shape of the bottom on the windmill. -Cut and lay the popsicle sticks flat on a piece of wood that will hold your windmill. -I would continue gluing pieces on top of this base with the sticks laying flat on top. It will take a lot but it will allow you to stagger the sticks so that you can make the walls go in and out depending on the placement of your sticks. -When your base is done, place sticks on top to cover it up. -Begin constructing your blades. Make a hole in the middle so that it can spin. -Now build a "block" on top of your base with sticks. -Build a top for your windmill and that will sit on the base. -Insert the blades into the block... -Use the toothpicks as window trim, door trim and for the blades. You can also use it for support and structure if you use the sticks differently. It sounds confusing but I hope you can make sense out of this suggestions. Good luck. * 2 years ago


How do you build a tower out of popsicle sticks?

You will need glue, razor blades and a picture to guide you. (Oh, I'm also assuming you are going to be making a Dutch type of windmill....) Can you only use popsicle sticks? If not, add toothpicks and paper clips to your list. Toothpicks are great for adding detail and for using as supports. The paper clip can be opened to help support the blades so that they will spin. You can make the base square or to be fancy a pentagon or octagon! -Begin by drawing the shape of the bottom on the windmill. -Cut and lay the popsicle sticks flat on a piece of wood that will hold your windmill. -I would continue gluing pieces on top of this base with the sticks laying flat on top. It will take a lot but it will allow you to stagger the sticks so that you can make the walls go in and out depending on the placement of your sticks. -When your base is done, place sticks on top to cover it up. -Begin constructing your blades. Make a hole in the middle so that it can spin. -Now build a "block" on top of your base with sticks. -Build a top for your windmill and that will sit on the base. -Insert the blades into the block... -Use the toothpicks as window trim, door trim and for the blades. You can also use it for support and structure if you use the sticks differently. It sounds confusing but I hope you can make sense out of this suggestions. Good luck.


How do you make the number ten using only two sticks?

Make an X out of the two sticks. X is the Roman Numeral for 10.


Are all parrellelograms rectangles?

No. Only some parallelograms are rectangles. But all rectangles are parallelograms.


All rectangles are rhombus?

No. Only some rectangles are - when they are squares.