To make an iron bar into a magnet you need to get a bar magnet and stroke the iron one way when you get to the end of iron take the magnet off and jump it back to the start and stroke repeat this several times and your bar will soon become magnetic.
You can also change it into an electromagnetic by rapping a coiled wire tightly around it and send the current through the wire. The current will induce a magnetic field, causing the iron to magnetize temporarily.
Lastly, you can heat the iron in a powerful solenoid field. As the iron heats up the regions become "free" to orientate with the field. The iron has to be heated to a orange/yellow glow before this is largely effective. The iron should then be allowed to cool in the presence of the field.
You can differentiate between a bar of iron and a bar of copper by testing their magnetic properties - iron is attracted to magnets, while copper is not. A bar magnet will attract small iron objects, while a bar of copper will not be attracted.
When an iron bar is placed near a magnet, the magnetic field of the magnet aligns the magnetic domains within the iron bar. This alignment increases the overall magnetic field strength of the iron bar, effectively inducing magnetism in the bar.
The bar that affects the compass is the magnet, The bar that is attracted to the magnet is iron, and the bar that is not attracted to the magnet is aluminum.
by using a bar magnet,because iron fillings are magnetic and hence it gets attracted to that bar magnet
To make an iron bar into a magnet you need to get a bar magnet and stroke the iron one way when you get to the end of iron take the magnet off and jump it back to the start and stroke repeat this several times and your bar will soon become magnetic. This is only temporary, therefore the iron will become normal after the magnetic field rubs off. This means that making iron into a magnet is indeed a physical change.
Because anything that has iron is attracted to magnet so whether its not fully an iron as long as it has iron in it, it can make the magnet move or attract it
A temporary magnet, such as an electromagnet, can attract iron but only for a short period of time. This type of magnet requires an external power source to create a magnetic field, which can be turned on and off as needed.
To make an iron bar into a magnet you need to get a bar magnet and stroke the iron one way when you get to the end of iron take the magnet off and jump it back to the start and stroke repeat this several times and your bar will soon become magnetic. You can also change it into an electromagnetic by rapping a coiled wire tightly around it and send the current through the wire. The current will induce a magnetic field, causing the iron to magnetize temporarily. Lastly, you can heat the iron in a powerful solenoid field. As the iron heats up the regions become "free" to orientate with the field. The iron has to be heated to a orange/yellow glow before this is largely effective. The iron should then be allowed to cool in the presence of the field.
Iron filings interact with a bar magnet by aligning themselves along the magnetic field lines produced by the magnet. This creates a visible pattern that shows the shape and direction of the magnetic field.
When a bar magnet is placed under a sheet of paper with iron filings on top, the iron filings align along the magnetic field lines of the magnet, showing the direction and strength of the magnetic field.
It lines up in the same direction :)
Rub the iron needle along one direction on the strong bar magnet repeatedly until it becomes magnetized. Make sure to always rub it in the same direction to ensure a consistent magnetic field. This process aligns the magnetic domains within the iron needle, causing it to become permanently magnetized.