Remove the central pin, unscrew the screws, and vu-wala.
There is a black area that can open
you might have missed the screw under the cocking mechanismorif it is a newer model, it might be gluedoryou may need to pry open the handle first
Maverick opened on May 26, 2007. It has a 100 foot drop and has a max speed of 70 mph.
and no it wount explode
open up the jam door
No, it is not open on Mondays.
The stock can be removed once it is attached. all you have to do is unscrew all the screws on the gun (not the stock) and open it. Then just take the top of and slide it up. but first you must twist the barell off.
To remove a marble from a Maverick Nerf gun, you will need to first ensure the gun is not loaded or primed. Next, carefully disassemble the gun by removing the screws and separating the components. Locate the marble within the barrel or chamber and gently shake or tap the gun to dislodge it. Once the marble is free, reassemble the gun in the reverse order and ensure it is functioning properly before use.
Open the gun up fully.There should be an orange piece (barrel,plunger,ar, and the spring.)Take apart barrel fullythere is a three pegged piece, spring, and 1 pegged piece.throw out spring, 3 pegged.cut the peg off the 1 pegged piece throw away the peg and put the piece back in.put back together.
A Miedium size Philips screw driver
Not in less you open it up and take out the locks
You open access and take the jammed bullet out. Or if access doesn't open take the clip out then take the jammed bullet out.