you need to get in your Tahoe
1. put the key in the ignition
2. hold down the unlock button
3. continuing holding down the unlock button, turn the ignition on, then off, then on, then off again.
4. Release the unlock button(The Locks shoul lock then unlock)
5. Press the unlock and lock buttons on the remote at the same time and hold for 15 seconds
if you have done it right after 15 seconds the locks should lock then unlock
and your remote is programmed
after this turn the key to the on position to exit program mode
how do you program your keyless remote for 2003 Chevy blazer
How do i program my remote car starter / lawless remote
How program my keyless entry remotes for 2003 chevy malibu
With a VAG-COM, or get the dealer to do it.
It should tell you in your owners manual.
I had the same problem. Google "keyless entry remote 2003 Jeep Grand Cherokee".
Where is the ecu fuse on a 2003 Tahoe
as far as I know you have to have the dealership do it cause they have to read the codes in the computer to set the remote
Look in your owners manual for the directions.
To program a 2003 Ford Taurus remote, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Within 10 seconds, press the "Lock" button on the remote for at least one second, then turn the ignition back to "Off." Repeat this process for each remote you want to program, ensuring you complete it within 40 seconds. Finally, test the remote to confirm that it has been successfully programmed.
Try this site... http://www.cars101.com/subaru/keyless.html#alpine used it to program a remote for my 2005 Outback Wagon
can soneone help me? i lost all my remote keyless entry for my 2003 Chevy express van and i just got a new repacement. but i don't know how to program it.. can soneone help?