0
First, hold down the unlock feature on your door and keep it held down. While holding down, turn ignition key over 2 times and turn off (dont start vehicle). The speed at which you do this is not important, but just turn to where radio will play and instrument panel lights up. After you have done this the unlock-lock will cycle on your doors automatically and the horn will sound. Now, you can let go of the unlock on door and Hold the Lock and Unlock function on the remote, Both at same time! Hold for 15 to 20 seconds until your doors cycle thru lock-unlock. They will do this automatically while you are holding both remote keys. Now, Turn the key over again and then off. This should set your remote to work. If this does not work, there may be a problem with the remote or you may have a remote not compatible with vehicle or even dead battery in remote. Hope this saves someone some time and money!
What else can I help you with?
How do you program a keyless remote for a 2000 gmc Yukon?
How do u program a keyless remote for a 2000 GMC Yukon
How do you program a Mazda Millenia key less remote?
How do I re-program a remote for a 1997 mazda millinea?
How do you program a keyless remote for a 1999 GMC YUKON?
Go to best buy and ask the geek squad!
How do you program the garage door opener on a 2001 gmc Yukon XL?
REad the owners manual. But I believe you have to put garage opener in learn or program mode then depress and hold button on the Yukon this will allow it to program itself to you door remote
How do you program a keyless remote for a 2001 GMC Yukon?
If it's the same as the 2003 yukon, you just press the "locked" and "unlocked" at the same time for about 5-6 secs
How to program remote key less entry remote 1997 Pontiac transport?
the dealer normally does this service for no charge
How do you program a keyless entry remote for a 1997 z28 camaro?
check in your owners manual if you have it.
How do you program a 1997 Chrysler stratus keyless entry remote?
The dealership scan tool is required.
How do you program keyless entry remote for 1989 Buick Park Avenue?
The 1989 Buick Park Avenue does not come with a remote keyless entry. The keyless remote entry was not available till 1997.
How can you bypass or disable a factory alarm on a 1997 G M C Yukon had to replace original ignition switch and key never had a alarm remote for Yukon?
The new chipless key, or unmatched key will need to be reprogrammed into the cars computer.
How do you program a nova gate remote?
how do you program your remote
How do you program your remote for your 1997 Jaguar XJ6?
To program the remote for a 1997 Jaguar XJ6, first, ensure the vehicle is in the "On" position without starting the engine. Insert the key into the ignition and turn it to the "On" position, then press and hold the "Lock" button on the remote for about 10 seconds. Release the button and turn the key back to the "Off" position. Test the remote to ensure it operates the locks correctly; repeat the process if necessary.
