* Cut the cord
* strip the three wires
* link them up to the correct terminals in the plug
* insert the right fuse for the product
* BE CAREFUL * DON'T DO THIS IF YOU ARE UNSURE
A USB cord that you plug into your computer
unplug old cord...plug in new cord
If your question is can you use a #6 flexible SOOW cord and put a 30 amp plug on it, then yes. The breaker that feeds the receptacle that the cord will plug into can be no larger than a 30 amp breaker. What limits the cord capacity to 30 amps is the ratings of the plug on the end of the cord.
To replace a plug on a cord, first cut off the old plug and strip the insulation from the cord wires. Then, attach the wires to the new plug following the manufacturer's instructions. Make sure to secure the wires properly and test the connection before using the cord.
To replace the plug on an extension cord, first cut off the old plug, strip the insulation from the cord's wires, and then connect the wires to the new plug following the manufacturer's instructions. Make sure to match the wire colors and secure them tightly. Finally, test the cord to ensure it is working properly before use.
you take you USB cord and plug it in to the usb cable....EASY!
All you need to do is plug in your Usb cord into your computer
you plug n your USB cord n then you transfer your music to it
To change a plug on a cord, first cut off the old plug and strip the insulation from the wires. Then, attach the wires to the new plug following the manufacturer's instructions. Make sure to match the correct wire colors to the corresponding terminals on the plug. Finally, secure the wires in place and test the connection before using the cord.
Plug the cord into the computer and then plug the other end of the cord into the iriver. Then drag the songs you want on the side bar that says iriver sinc list. I have an iriver clix.
put the three colored cords in the same colors on the tv and the power cord in the plug
The purpose of the plug on the cord is to connect the cord to an electrical outlet so that electricity can flow through the cord and power the device it is connected to.