Well , if you want to put in the labret
What you do is you Take off the little ball or stud at the end and set it aside , then pull your lip forward and put the screw part through your hole from the inside.
If you haven't got the right gauge what i did was i put the screw part from the outside and the stud from the inside to break the skin , then it was perfect
Happy Piercing
xx
Iris.
Yeah. Some tongue ring balls are pretty big and may look tacky on lip rings.
Place the ring then place the captive bead over the seam
yeah you should be able to, as long as the lip ring is the same thickness as the stud you had your nose pierced with, otherwise the ring will not go through. :) hope this helped.
sorry, you can't
Lip ring is not a compound word.
Yes it's called a lip ring.
To get a ring in your lip.
The ring is scaled (sized) to your lip, it's not a one size fits all affair. Your professional body piercer will assist you in selecting a ring that will suit your lip. Be aware that your lip will swell so the ring must allow for swelling.
yes you can. i have a lip ring and the person i kiss barely notices it. the size of the lip ring makes a difference. if it is large it might get in the way.
Ok, i got my lip peirced about a month ago. They provide you with a lip ring. They usually ask if you want a hoop or a stud. I have a hoop because it heals faster. So no you do not have to supply a lip ring. But when you want it changed to a different lip ring you do. Hope that helped!
It probably won't but it can. Your piercer should put the ball in there pretty tight but if the ball does pop out the ring could slip out.
It can be tricky. You'll need ring closers. If you only have pliers, wrap some medical tape around them so that you don't scratch the ring. My explanation might be difficult to understand so maybe search youtube for tutorials. -before you put it in your lip, tighten or open the ring just enough so that the ball will pop in and out easily-there are dimples on the ball -put the ring in your piercing then slip the ball into place - tighten the ring so that the ball doesn't slip out -the end :3