0
Okay so you have to feed the paper through the slit in the back and put it through between the black and silver part but it takes forever! so what i did was folded a post-it note in half and then evenly taped it to the top of the roll that you use to feed into the calculator. Feed it through and hold down the feed button while pushing the paper/post it through. the post-it makes the paper less flimsy so you can push it through without the paper bending. i know it's pretty ridiculous but it works and saves a lot of time!
What else can I help you with?
How do you load paper in Canon palm printer P1-DHIII?
5.99 plus 13% tax
Where can you download canon palm printer P1-DH V manual?
Where can I get a manual for a Canon Palm Print P1 DHV
Where can you download canon palm printer P1 DH V manual?
Where can I get a manual for a Canon Palm Print P1 DHV
How do you clear E on canon palm printer P1 DH V in order to be able to print?
To clear the "E" error on a Canon Palm Printer P1 DH V, first, ensure that the printer is turned off and check for any paper jams or obstructions. Remove and reinsert the ink cartridge to ensure proper seating and connection. Additionally, verify that the paper is loaded correctly and that the printer's settings are appropriate for the type of paper being used. Once these steps are completed, turn the printer back on, and the error should be cleared, allowing you to print.
How do you clear an error message on Canon p1-dh v palm printer calculator?
To clear an error message on a Canon P1-DH V palm printer calculator, first, check for any obvious issues such as paper jams or low battery. If the error persists, press the "C" or "CE" button to clear the display. If you are still encountering the error after these steps, try turning the calculator off and then back on to reset it.
Can I buy ink for my canon palm printer?
Yes, you can buy ink for your Canon Palm printer, but availability may vary depending on the model and age of the printer. It's best to check Canon's official website or authorized retailers for compatible ink cartridges. Additionally, consider looking for third-party options if original cartridges are hard to find. Always ensure that the ink you purchase is specifically designed for your printer model to ensure optimal performance.
Canon palm printer p1-dh iii?
Canon continues to expand its calculator quality with more advanced features in this simple to use, palm printing calculator. Now the P1-DHIII offers advanced calculations right in the palm of your hand. Business and Sales functions can be calculated with the touch of a few keys. Tax rates can be stored and recalled whenever needed. And if you need a printout--no problem--the P1-DHIII may be small, but provides professional printouts using the standard size calculator paper roll. http://www.smoothprinterservice.com
Canon p1-dh v change settings?
How do i change the setting on my p1-dh v palm printer from rounding to the nearest dollar to actual balance. please help...... Thanks.
Is it possible to hook up this printer to my Palm device?
Sadly no� this Lexmark device does not support Palm software.
How to load paper canon palm printer p1-dh v?
I just successfully completed the task of loading paper into the canon palm printer p1-dh v. My problem was that the paper was not being grabbed by the "Feed" button. Where I was guiding the paper, after feeding the paper through the back of the machine (the slot is located on the outside of the back of the machine), the paper naturally wanted to enter underneath the black plastic plate where it would end up underneath the entire printing mechanism. As the instructions indicate, the paper does not actually feed "under the black plastic plate", it should feed through it. There are two rectangular silver tabs, one on each side of the proper paper entry slot. I cut the paper at a very slight angle (edit:actually, if you cut it into a truncated triangle, it's even easier!) and finally found the magic entry point. Because the machine is so tiny, that entry slot is almost invisible, except for those two silver tabs. After you manage to insert the end of the angled cut through the "invisible slot" be sure the entire edge of the paper actually enters the slot so that when you push the "Feed" button, the paper is grabbed and fished through evenly. (edit: If the paper cannot be advanced by the "Feed" button, remove the plastic cover by pushing it toward the direction of the arrows on the left side which are embossed directly on the clear plastic cover and pull the paper manually. When reinstalling the cover put the front end in first, make sure the entire cover is flat to the printer case, then push the front slightly toward the back and finally slide the cover forward until it is seated). Hope this helps somebody! (edit: It sure did!) I found that folding the end of the paper into an arrow and then watching the feed button rotate, I could then easily see where the paper should be inserted. With it folded like that, it went in like a hot knife in butter. Your answer did the trick for me! I have also found it easier to store the paper inside the machine, using the arm only when printouts get really long, just to prevent accidentally entering the back slot. Works much better than having the roll fall off and unravel. I found a washer about an inch in diameter with the hole in the middle just large (or small) enough to fit over the paper arm. It holds the roll on and since it has to be tilted to fit on the arm it wont fall off while handling the printer. BTW...your solution kept me from trashing this great little printing calculator.
Can shredded paper be recycled back to the palm material?
No paper can only be recycled back to paper and not to the palm material back.
How do you make palm cards using a paper?
A palm card can be made by the size of your palm. Just measure your hand on a piece of paper and cut it out. There you go.
