To put the Plantronics Voyager Legend (model 220) in pairing mode, first ensure the headset is turned off. Then, press and hold the power button until you hear "pairing" or see the Bluetooth indicator light flashing red and blue. Once in pairing mode, you can search for the headset on your Bluetooth-enabled device to complete the connection.
Put your car in the pairing mode, and then turn on Bluetooth on the Nexus One
Put your Plantronics bluetooth in pairing mode. On the phone, go to Menu>Settings>Wireless & Networks>Bluetooth settings>Scan for devices. It should auto pair, if not, enter 0000.
The Plantronics Explorer 370 Bluetooth headset is compatible with 3g phones. Once you make your cell phone discoverable, then put the Plantronics Explorer 370 headset into pairing mode by holding the call control button until the headset flashes red and blue. Here is the link below in related links for the Explorer 370 user guide with the pairing instructions.
Yes, the Plantronics Explorer 340 is compatible with the Samsung Blackjack. Once you make your cell phone discoverable, then put the Plantronics Explorer 300 series headset into pairing mode by holding the call control button until the headset flashes red and blue. Please see the link in related links for the Explorer 320 user guide with the pairing instructions, the procedure for the 340 is the same. Good luck from Headsets Direct!
To put the Voice Star 17-2596 in pairing mode, you typically need to press and hold the Bluetooth pairing button on the device until the LED indicator light starts flashing rapidly. This indicates it is in pairing mode and ready to connect to other Bluetooth devices. Refer to the product manual for specific instructions.
To put a PS3 Bluetooth earpiece in pairing mode, start by turning off the earpiece if it’s on. Then, press and hold the power button until the indicator light starts flashing, typically in blue and red, which signifies it's in pairing mode. Next, go to the PS3 menu, navigate to "Settings," then "Accessory Settings," and select "Manage Bluetooth Devices" to search for the earpiece. Once it appears, follow the prompts to complete the pairing process.
Start with the Jawbone device off. Press and hold the Jawbone's hidden "Noise Shield" button (the black end that connects to the charger, right under the word Jawbone) for 3 seconds until the LED status indicator alternately flashes white then red. The pairing mode will last for 2 minutes, or until pairing is complete. The code is "0000"...that's four zeros.
Turn on the earpiece by pressing the talk (big silver button) for several seconds until you hear several beeps in the earpiece. The blue light will flash to indicat that it is turned on. Then to place it into pairing mode hold down both the +/- volume buttons for a few seconds until the indicator light flashes red and blue repeatedly.
To put your Beats wireless headphones in discovery mode, first ensure they are powered off. Then, press and hold the power button until the LED indicator flashes white, signaling that the headphones are in pairing mode. You can then connect them to your device through Bluetooth settings. Make sure your device's Bluetooth is turned on and search for the Beats in the available devices list.
All you need to do is hold the two outside buttons (at the same time) until the light flashes red and blue. When that happens, you enter the pairing code (in the manual). Once you enter the code....the light shuts off and u can begin using it.
To put your QCY QY8 Bluetooth earbuds in discovery mode, first ensure they are powered off. Then, press and hold the multifunction button until the LED indicator flashes red and blue alternately. This indicates that the earbuds are in pairing mode, allowing them to be discovered by your device. Finally, search for the earbuds on your Bluetooth-enabled device and select them to connect.
you put it in safety mode