0
1. Remove fuel tank. 2. Disconnect throttle cables 3. Remove side covers 4. Remove air-filter case under seat 5. At top of air-box (between filter box and carbs) there are 2 bolts with 10mm hex heads, remove these. 6. Remove crankcase vent hose from the air-box 7. Loosen clamps for rubber boots from air-box to carbs as well as the clamps on rubber manifolds to engine 8. Slide air-box away from carbs 9. With a rocking motion, pull carbs rearwards from engine. The carbs will come out from manifolds 10. Rock carbs with engine end pointing up, gently but firmly work the carbs out to the right side of the bike.
What else can I help you with?
What year was the Suzuki GS1000 first introduced?
The Suzuki GS1000 is a motorcycle manufactured by the Suzuki company. The Suzuki GS1000 motorcycle was first introduced in the year 1997 in America and Japan.
What is the memory of the Zalman GS1000?
This is a case and it has no memory.
How do you remove a carburetor from a 4.5hp Briggs and Stratton motor?
(1) Remove the air filter and housing (2) Loosen the cable bracket (3) Remove the throttle and choke cables from the carburetor (4) Remove the governor spring from the carburetor (5) Remove the two bolts that fasten the carburetor to the engine. CAUTION: Do not stretch or bend the governor spring while removing or re-installing.
How do you remove the carburetor from a 1986 Ford F-150 6 cylinder?
how do you remove the old carburetor form a 1984 ford f150 4.9
How do you remove a carburetor on a 1996 Honda xr250l?
To remove the carburetor from a 1996 Honda XR250L, first, turn off the fuel valve and disconnect the fuel line. Next, remove the air intake boot by loosening its clamps and detaching it from the carburetor. Then, detach the throttle and choke cables, and finally, remove the two bolts securing the carburetor to the engine. Carefully pull the carburetor off the intake manifold, taking care not to damage any gaskets.
How do you locate the high speed carburetor adjustment screw on two cycle engine?
In most cases, you can locate the carburetor screws in the front of the carburetor. Sometimes you have to remove the air gilter to get to to the carburetor.
How do you remove carburetor from 2004 polaris predator 500?
To remove the carburetor from a 2004 Polaris Predator 500, first ensure the engine is off and cool. Disconnect the battery, then remove the air filter and intake boot to access the carburetor. Next, detach the fuel line, throttle cable, and any additional linkage connected to the carburetor. Finally, unscrew the mounting bolts to lift the carburetor off the engine.
How do you clean the carburetor on a 2005 Honda TRX450R?
To clean the carburetor on a 2005 Honda TRX450R , you will need a Philips head screw driver and carburetor cleaner along with patients. Follow these simple instructions: Remove the front plastics, fuel tank and take shroud. Using a Philips head screwdriver, remove the two brackets. Then remove the carburetor and the float on the bottom. Remove the jets and either spray or soak in carburetor cleaner. Hint: if you see daylight through the jets, they are clean.
How do you remove a carburetor on a 2005 Honda trx 450r?
To remove the carburetor from a 2005 Honda TRX 450R, first, ensure the engine is cool and disconnect the battery. Remove the air filter and intake boot clamps to access the carburetor. Then, disconnect the fuel line and throttle cable, followed by the choke cable if applicable. Finally, unbolt the carburetor from the engine and carefully lift it out.
How do you remove a carburetor from a 350 Honda ATV?
To remove the carburetor from a 350 Honda ATV, first, ensure the engine is off and cool. Disconnect the fuel line and any electrical connections, then remove the air filter and intake boot to access the carburetor. Unscrew the mounting bolts securing the carburetor to the engine, carefully detach it from the intake, and then remove it from the ATV. Make sure to take note of any gaskets or seals for replacement during reassembly.
How do you remove the carburetor on a 2002 Chevrolet impala?
Get The Haynes manuel.
How do you remove carburetor cub cadet tractor?
How to take off the carburetor off a cub cadet snowblower 305cc 30 in cut. Take the out side cover off of the carburetor
