Not an easy answer by far, and not for the faint hearted. You start with the panel that is nearest to the windshield the one with the slots for the speakers and defog vent, pry that up and there will be the dashboard panel underneath. You will need to remove the panel under the steering wheel. Now for the dash board itself there will be screws all over and you may need to pop out the vent louver to access one of them, one of those 90 degree ratcheting screwdrivers comes in real handy. Tip: go easy and don't force anything, take the time to see how it all goes together and you might be ok. take pictures in stages with a digital camera if you don't remember how things go back together easily. Best of luck!
B8,5d :)
how do you change lanuage display setting on peugeot 206 1.4 hdi 2003 model please
To remove the dashboard of a Peugeot 206, start by disconnecting the battery to ensure safety. Remove any screws or clips securing the dashboard, typically found around the edges and under the trim pieces. Carefully detach the trim and then pull the dashboard away from the mounting points, taking care to disconnect any electrical connectors for lights or controls. Make sure to keep track of all screws and components for reassembly.
Dashboard warnings on your Peugeot 206 depend on the car's problem. It could be an indicator light for ABS, airbag, engine light or something else.
To remove the ECU from a Peugeot 206, first disconnect the negative battery terminal to ensure safety. Then, locate the ECU, which is usually found behind the dashboard or in the engine bay. Carefully unplug the wiring harness and any associated connectors, ensuring not to damage them. Finally, unbolt the ECU from its mounting bracket and gently remove it from the vehicle.
how to remove starter motor for Peugeot 206 1.4 hdi.
A similar car to the Peugeot 206 is the Peugeot 205 which the Peugeot 206 is modeled after with minor modifications and upgrades from the Peugeot 205 to the Peugeot 206.
To remove the clock on a Peugeot 206, first, disconnect the car battery to ensure safety. Then, use a flathead screwdriver or a similar tool to carefully pry off the trim surrounding the dashboard display. After removing the trim, unscrew the clock unit from its housing and gently pull it out. Finally, disconnect the wiring harness attached to the back of the clock to fully remove it.
Remove the thermostat housing. where is, and how do i remove the housing
To remove the heat exchanger from a Peugeot 206 CC, start by disconnecting the battery and draining the coolant from the system. Next, remove the dashboard and any components obstructing access to the heat exchanger, including the air conditioning unit if applicable. Disconnect the hoses connected to the heat exchanger, then unbolt it from its mounting points. Carefully lift it out, ensuring no damage occurs to surrounding components.
how to remove and fit rear brake shoes on a peugeot 206 1.1
Removing the instrument cluster on a Peugeot 206 is simple. You start with removing the steering wheel and then take out the dash board and then take out the instrument cluster.