0
I assume you're talking about the evaporator? If so, remove the right side exhaust manifold and start in. You will find that most of the screws are located on the engine side of the firewall, but will have a couple on the inside compartment as well. I changed my evaporator about 5 years ago, and it went unbelievable easy. Just awfully cramped. Also, remove the right side grill, as you will need to reach in from the side for some of the wrenching required.
What else can I help you with?
Do you have to discharge the ac when replacing AC clutch?
no, unless u have to remove the compressor unit. The clutch can be replaced with out removing the compressor if you have room to do it.
Heater core change 1972 corvette with AC?
Remove the heater core retaining bolts. Remove the heater core water supply hoses. The heater core will come out. You can access the heater core in your 1972 Chevrolet Corvette through the passenger side kick plate.
Do you need to remove the dash board to remove the air conditioning unit?
Not all vehicles require removal of the dash to take out the ac unit. Depending on the model of car, the ac coils can be removed by unbolting the cover and sliding the coils out from under the dash.
How do you replace ac unit 1997 t100?
To replace the AC unit in a 1997 Toyota T100, first, disconnect the battery and recover the refrigerant using a certified recovery machine. Remove the dashboard or access panel as necessary to reach the AC evaporator and compressor. Disconnect the electrical connectors and refrigerant lines from the old unit, then remove it from the vehicle. Install the new AC unit by reversing the removal process, ensuring all connections are secure, and recharge the system with the appropriate refrigerant.
How do you remove radiator hose on Saturn L200?
How do I remove the screw/bolt holding the AC unit lines to the radiator on the driver side.
What happens when you oversize your ac unit?
Mostly like it will cool the house quickly, but by doing this the unit does not run long enough to remove the humidity. If you do not remove the humidity you wont feel cool.
How can I effectively prevent and remove mildew in my AC unit?
To effectively prevent and remove mildew in your AC unit, you can regularly clean and disinfect the unit, ensure proper ventilation, and use a dehumidifier to reduce moisture levels. Additionally, replacing air filters and scheduling professional maintenance can help prevent mildew growth.
Where is the ac power relay located on a 1991 Chevy Corvette?
The AC power relay is located behind the right side of the dash on a 1991 Chevy Corvette. It is on top of the plenum.
What are the best spark plugs for 1993 corvette?
AC/Delco
How much will it cost to install AC in a 1982 Chevy Corvette?
== ==
How do you replace the AC evaporator on a 1994 Chrysler Concorde?
Take out entire dash. Remove a/c unit, disasemble unit. Pull out evap. core.
How do you remove a ac evaporator on a 2000 Dodge Magnum 3500?
To remove the AC evaporator from a 2000 Dodge Magnum 3500, you'll first need to discharge the AC system and remove the refrigerant. Next, disconnect the battery and remove the dashboard to access the HVAC unit. After that, disconnect the heater core hoses, the AC lines, and any electrical connectors. Finally, unbolt the evaporator from the HVAC housing, and carefully remove it from the vehicle.
