1. Turn the ignition KEY to unlock and leave the key inserted in lock assembly 2. Move ignition assembly to the "Off" position to unlock the forks. LEAVE THE KEY IN LOCK 3. Turn the Handlebars all the way to the right 4. With the ignition key still in the lock turn the LOCK ASSEMBLY to "Access" 5. Standing on the left side of the bike look at the lower left underside of the LOCK ASSEMBLY. You will see a small button in the rear left corner 6. Use a small screwdriver to depress the button and hold while pushing down on the KEY (the *KEY* not the entire knob) and turning it 60 degrees in the counter clockwise direction. 7. Lift and remove knob 8. Reverse to reinstall except there is no need to depress the button
It's a Harley Davidson Electra Glide Classic.
This diagram is located in the harley Davidson service manual
What is the oil capcity for a 1996 Harley Davidson FLH Electra Glide Classic
It's a 2006 Electra Glide Classic.
Only about 60 HP
how do u bypass the alarm on a Harley Davidson 2006 Electra?
To remove the ignition switch from a 1997 Harley Davidson Ultra Classic Electra Glide, first disconnect the battery to ensure safety. Next, remove the headlight assembly by unscrewing the retaining screws and gently pulling it away from the housing. Locate the ignition switch, disconnect the wiring harness, and remove the retaining screws or bolts securing the switch in place. Finally, pull the ignition switch out of its mounting position.
What is the spark plug setting for a 2008 Electra ultra Glide
1600
tire size rear on a 2000 Harley Electra Glide
The CVO ultra classic Electra glide is probably the most expensive Harley right now. It could cost a bit over 40k out the door.
These bikes range in price from $19000 to $39000. The range comes from the difference in models such as the Classic, Ultra Classic, Ultra Limited and so on.