The door panels will have tabs holding it into the door, and may also have screws in a couple places such as the door handles. The panel must be carefully pulled off after removing any screws, being careful not to break the plastic tabs.
Remove door panels.. Unscrew old speakers..Screw in new speakers..replace door panels...ready 2 GO..
remove the door panels
To replace the front speakers in a Toyota Sienna the door panels must first be removed. With the door panels removed the speakers will be easily accessible and the mounting screws can be loosen. Unplug the speakers and remove them. Install the new speakers.
Remove the door panels and replace the speakers. They sit in baskets and are simple to replace. We have instructions at our enthusiasts forum. www.trailvoy.com
You will need to remove the inner panels to gain access.
You don't need to remove front door panels, the speaker grills come out.
To replace the speakers in a 2001 Acura MDX, first, remove the door panels by unscrewing any visible screws and gently prying off clips. Disconnect the wiring harness from the old speakers and remove them from the mounting brackets. Install the new speakers by connecting the wiring harness, securing them in place, and reattaching the door panels. Finally, test the speakers to ensure they're functioning properly before reassembling everything.
Remove the door panels and unscrew the grills, then unscrew the speakers
To replace the rear speakers in a 2004 Infiniti G35 sedan, start by removing the rear seat bottom by lifting it up and out. Next, remove the rear side panels by unscrewing any fasteners and gently prying them away from the clips. Once the panels are off, you can access the speakers; disconnect the wiring harness and unscrew the old speakers. Install the new speakers by reversing the process: connect the wiring, secure the speakers, and reattach the side panels and rear seat.
To replace the rear speakers in a 1998 Dodge Durango, first, remove the rear door panels by unscrewing any visible screws and carefully prying off the panel clips. Once the panel is removed, disconnect the wiring harness from the old speakers. Then, unscrew the old speakers and replace them with the new ones, reconnecting the wiring harness. Finally, reattach the door panels securely.
You have to take the back seat out, and then remove the trim panels, you also might have to remove some of the headliner in the back to get the trim off, then you can get to the rear speakers, its one hell of a job
If your talking about the door speakers then you will have to remove the door panels to get to the speakers.