Using a screwdriver, remove the screws and clips from the panel. Pull the panel away slowly, remove wiring connections and the panel will come free.Ê
In a 2000 Ford Expedition it is in the right front passenger footwell , by the kick panel
In the right front passenger footwell , it's the interior trim panel in front of the front door , by the passengers feet
I believe that is in the right front passenger footwell , by or behind the kick panel in a 2000 Ford Expedition
The 2000 Chevrolet Blazer passenger side kick panel is held in place by eight retaining bolts. Remove the retaining bolts and the kick panel will come free.
To remove the passenger door panel on a 2000 Ford Expedition, start by disconnecting the negative battery cable for safety. Use a flathead screwdriver to carefully pry off the plastic cover behind the door handle, then remove the screws underneath. Next, gently pull the door panel away from the door frame, starting from the bottom and working your way up to disengage the clips. The process is similar for the other doors, though there may be slight variations in screw locations or panel shape.
Door Panels Removal & Installation 1. Remove the sail panel (Front Doors Only). 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc.The installation is the reverse of the removal.
YouTube it
Using a screwdriver, remove the screws from the panel, remove the clips from the panel, and pull the panel away gently. Remove any wiring connectors, and remove the panel from the frame.
In the right front passenger footwell , by the kick panel
remove the jack panel it's in the rear fender.
if you take off the door panel there will be three studs that connect the mirror to the door
In the front passenger footwell behind the kick panel ( there is an access plug in the kick panel to remove )