Smash the car and go to a body shop and tell them your butt in rumbley Smash the car and go to a body shop and tell them your butt is rumbley
I just replaced the rear brakes on our 02 explorer. If you have 4 wheel disc than the rear "hubs" are rotor hubs and once you remove the callipers you may have to back off on the emergency brake pads by turning the self adjuster. By the way you shouldn't have the e-brake on at all or you can not remove the rear rotor-hubs.
how to remove rear axle from 1988 f250 ford
Front or rear?
if its a flat tow, 4 wheels on the ground, put transfer case, hubs, and transmission in neutral, or remove both drive shafts, and dont exceed 55 mph. on the rear tires put all in neutral or remove rear drive shaft. on a trailer, no wheels on ground, just strap it down and go
Remove spindle, bring to auto mech shop to press apart.
break it
remove rims remove hubs then the 2 jam nuts pull of sproket before that loosen chain the pull axle strait out pretty simple
Rear hubs? You mean rear Wheels? 70-90ftb. Just use a breaker bar and lean on it good.
The different types of bicycle rear hub types available in the market include freewheel hubs, cassette hubs, and coaster brake hubs. Freewheel hubs have the freewheel mechanism built into the hub, while cassette hubs have the freewheel mechanism built into the cassette. Coaster brake hubs have a brake mechanism built into the hub that is activated by pedaling backward.
what causes rear wheel rotors to heat up
235 NM
To remove the rear axle on a 2004 CTS-V, first, ensure the vehicle is securely lifted and supported. Disconnect the rear differential by unbolting it from the subframe, and then remove the drive shaft. Next, detach the axle shafts from the wheel hubs and unbolt the rear control arms, allowing you to slide the axle out of the vehicle. Be sure to take necessary precautions and follow safety guidelines during the process.