This can be a really difficult procedure. You will still need the floor on the second story to allow for walking around.
The ceiling height of the first floor in commercial buildings in NYC are higher than the other floors. It is usually a lobby
To remove a ceiling light, first turn off the power to the light at the circuit breaker. Then, remove the screws or bolts holding the light fixture in place. Carefully disconnect the wires, noting their positions. Finally, remove the light fixture from the ceiling.
To remove a bathroom ceiling fan, first turn off the power to the fan at the circuit breaker. Then, remove the fan cover and disconnect the wiring. Next, unscrew the fan from the ceiling and carefully lower it down. Finally, remove any mounting brackets and patch up the ceiling as needed.
To remove a chandelier from the ceiling, first turn off the power to the fixture at the circuit breaker. Then, carefully unscrew the chandelier from the ceiling mount and disconnect the wiring. Make sure to have someone help you support the weight of the chandelier as you remove it.
To effectively remove a bathroom ceiling fan, first turn off the power to the fan at the circuit breaker. Then, remove the fan cover and disconnect the wiring. Next, unscrew the fan from the ceiling and carefully lower it down. Finally, remove any mounting brackets or screws to fully detach the fan from the ceiling.
To remove a light fixture from the ceiling, first turn off the power to the fixture at the circuit breaker. Next, remove the screws or bolts holding the fixture in place. Carefully disconnect the wires, noting their placement. Finally, remove the fixture from the ceiling and replace it with a new one if desired.
My uncle is a painter and he said you will probably have to repaint ceiling but first user a Kilz primer to cover the oily stain then paint ceiling.
To remove a drop ceiling, you will need to first remove the ceiling tiles and then take down the grid framework that holds them in place. Be sure to turn off any electricity running through the ceiling before starting the removal process. It is also important to wear protective gear such as gloves and goggles to prevent injury.
To remove an LED ceiling light, first turn off the power to the light at the circuit breaker. Then, carefully unscrew or unclip the light fixture from the ceiling. Disconnect the wires and remove the light fixture. Be sure to follow safety precautions and consult a professional if needed.
To remove a recessed light can, first turn off the power to the light fixture. Then, remove the light bulb and trim from the fixture. Next, unscrew the screws holding the fixture in place and carefully pull the can out of the ceiling. Disconnect the wires and remove the can from the ceiling.
To change a ceiling light, first turn off the power at the circuit breaker. Remove the old light fixture by unscrewing it from the ceiling. Disconnect the wires and remove the mounting bracket. Install the new light fixture by connecting the wires and securing it to the ceiling. Turn the power back on and test the light.
To remove a flush mount ceiling light, first turn off the power to the light fixture at the circuit breaker. Next, remove the screws or bolts holding the fixture in place and carefully lower it down. Disconnect the wires and remove the fixture from the ceiling. Be sure to follow safety precautions and consult a professional if needed.