Go to a hospital. Or use tweezers, depending on the pain level and severity. If its dirty steel then you should definitely go to the hospital.
steel wool is steel made from wool, so it would be neither
the wool does not rust
Steel wool is a mixture.
rub the backing with moistend steel wool and comet
Steel wool is a Mixture-Mechanical
Steel wool
Depends on whether you leave the steel wool in the Pepsi. If you take it out, the water in the Pepsi will cause the steel wool to rust away. If you leave it in, the phosphoric acid will slowly dissolve the steel wool.
Melting the steel wool is a physical change.
Yes, steel wool is conductive because it is made of steel, which is a good conductor of electricity. This means that electricity can flow through steel wool easily.
Scrub it with a wire brush and steel wool.
To use steel wool on polyurethane for a smooth finish, lightly sand the surface with fine-grade steel wool in between coats of polyurethane. This will help remove any imperfections and create a smooth surface for a professional-looking finish. Be sure to clean the surface thoroughly after sanding to remove any residue before applying the next coat of polyurethane.
Oh, dude, it's like this - you take the steel wool and just plop it into the copper sulfate solution. The steel wool reacts with the copper ions, forming a solid copper metal on the wool and leaving the solution without the Cu2+ ions. It's like magic, but with science!