To remove the brake pedal on a 1998 Suburban, unscrew the bolt that holds it to the steering wheel column. There are several wires that also have to be disconnected from here that control brake lights.
brake light swith located under the brake pedal is stuck.
theres a ensor on top of the brake pedal that needs changin
It is located just above the brake pedal pad.
And why in the world would you want to do that, as the rear brakes which are operated by the parking brake are already activated by the brake pedal. Do not even think of doing this.
slightly apply the E brake
Usually when a brake pedal feels more stiff than usual, there is a vacuum leak. The brake lines probably should be bled.
The brake light switch on a 1998 Daewoo Nubira is typically located near the top of the brake pedal assembly. It is mounted on the bracket that holds the brake pedal in place, and it activates the brake lights when the pedal is pressed. You may need to remove some cover panels under the dashboard for better access. If you're having trouble finding it, consulting the vehicle's service manual can provide more specific guidance.
Could be the brake light switch above the brake pedal.
The brake light switch is found behind the 1998 VW Beetles brake pedal. Reach it by removing the lower dash console to gain access to the nut holding the switch in place. Remove the nut then then the switch.
It's located very close the brakes pedal mounting.
It might be the brake pedal switch
check the brake light switch above the brake pedal