speed sensor on transfer case is probably bad.
To remove the fan from a 99 Suburban, turn the nut on the back of the fan to release. The nut is known to stick and rust, it may take spray lubricant and some force to break free.
it is no suh a thing is fan belt on 2002 corolla
You will probably have to remove fan/pulley first to get clearance then just remove fasteners from rad.
The size wrench to remove it should be 15mm.
blower resistor is bad
it can be replaced but check the resistors first they are probably the cause
It is inside of the fuel tank. You must remove the tank to service the fuel pump.
To remove the cooling fan from a 2002 Ford Explorer, first disconnect the negative battery cable to ensure safety. Then, remove the fan shroud by unbolting it from the radiator support and disengaging any clips or fasteners. Next, disconnect the electrical connector from the fan motor, and finally, remove the bolts securing the fan to the water pump or clutch assembly. Carefully pull the fan out from the engine compartment.
The 2002 Chevrolet Suburban has a V8 engine.
The 2002 Chevrolet Suburban has 16 valves.
I believe you have to remove the battery, battery tray and then the washer fluid reservoir, now you can remove the pump from the reservoir.
What type of coolant is recommended for a 2002 chevy suburban