Use fishing line to remove and then goo-be-gone for the residue.
how can i remove tank emblem from my hatley
How to remove gas tank on a 950cc 2011 yamaha
13.2 gallons
Inside the fuel tank.
remove gas tank very easy three bolts for tank and 4 Allen screws for carbs
To remove the gas tank from a Yamaha 660 Grizzly, first, ensure the ATV is turned off and on a stable surface. Disconnect the fuel lines and any electrical connections attached to the tank. Next, remove any mounting bolts or screws securing the tank to the frame, then carefully lift the tank off. Be cautious of any residual fuel and dispose of it properly.
The spark plug is located under the fuel tank. You need to remove the tank to replace the plug.
It is under the seat toward the front of the seat and rear of the tank. Remove the drivers seat to get to the battery. It maybe be necessary to loosen th tank in several spots to lift the tank slightly. On the Yamaha r1 2004-2008 you have to lift the tank as well to get it out. Good luck!
under the rear fender on the left side.You must first remove seat so that you can access the cap for the oil tank.Do not remove foam baffle from oil tank.
Use dental floss or fishing line and a sawing action
To remove the oil tank from a Yamaha Razz, first ensure the engine is cool and disconnect the battery. Then, locate the oil lines connected to the tank and carefully detach them, using a container to catch any spilled oil. Next, unscrew any mounting bolts securing the oil tank in place, and finally, lift the tank out of its compartment. Make sure to follow proper safety precautions and dispose of any oil properly.
To remove the petcock on a Yamaha Kodiak, first, ensure the fuel tank is empty and disconnect the battery for safety. Next, locate the petcock, typically found on the bottom of the fuel tank, and use a wrench to loosen and remove the mounting screws or bolts. Carefully detach the fuel lines from the petcock, ensuring no fuel spills, and then you can remove the petcock from the tank. Finally, clean the area and inspect for any debris or damage before installing a new petcock if needed.