0
What else can I help you with?
How do you replace the heater core in a 1986 Honda Prelude?
To replace the heater core on the 83-87 Prelude with A/C The center console and the upper dash will be removed, This is not a job for the novice.If you have a Prelude without A/C the heater core can be removed simply by removeing the heater control valve which is under the hood behind the engine against the firewall, Then under the dash you will find the hose connections to the heater core entering thru the firewall, remove the clamps from the hoses, remove the t-bracket retaining screw and bracket that hold the heater core tubes to the control box, remove the screws that retain the heater core hose cover then slide the heater core from the control box and reinstall in reverse order.You can view a picture of the unit at [url]http://www.slhondaparts.com/browse.asp?Model=PRELUDE&Year=1985&TrimLevel=2DR+DX&TransLevel=5MTKL&Section=E&Category=B++1702%7CHEATER+UNIT&Doors=2&Emissions=KL&PartCatalogId=13SB00&ViewParts=true [/url] this link is for an 85 but they are basically the same.
How do you remove a rear strut on a 1986 Honda Prelude?
inside the trunk?
How do you change the heater core in a Toyota supra 1986?
To change the heater core in a 1986 Toyota Supra, first disconnect the battery and drain the coolant. Remove the dashboard and climate control assembly to access the heater core housing. Disconnect the heater core hoses from the firewall, then unbolt and remove the heater core itself. Install the new heater core, reassemble the housing, dashboard, and reconnect the hoses, ensuring to refill the coolant before testing the system.
Does 86 Honda Prelude have clutch cable?
The 1986 Honda Prelude does not have a clutch cable. The 1986 Prelude has a hydraulic clutch instead of the clutch cable.
1986 Toyota van blower heater relay switch?
you will find it in the heater box, also where the blower is. it is easy to remove.
Where is the pcv for a 1986 prelude si 20 fuel injected and?
86 prelude pcv locationThe 1986 1987 Honda prelude pcv valve is in the middle under the intake. It has a hose running through an opening on the intake. It is only accessible by removing the intake. The intake is very hard to remove in the carbecause the bottom bolts are so hard to get to.
How much hp does an 1986 prelude have?
140
What engine do you have in your1986 Honda Prelude 2.0si?
The 1986 Honda prelude 2.0 Si has a A20a3.
Why does the heater on a 1986 Chrysler Lebaron only blow out cold air?
Low coolant? Thermostat not opening? Control cable not working? Plugged heater core? Heater core "airbound"? Low coolant? Thermostat not opening? Control cable not working? Plugged heater core? Heater core "airbound"?
1986 Honda prelude transmission fluid?
peace89
Where is the heater control valve in a 1986 Olds 98 Regency Brougham 3.8 with auto temp control?
It is at the rear of the intake manifold, follow the heater hose. there is a flow door under the dashboard with a cable connected is that the control or does the valve body at end of intake still control it?
What is the Horsepower of a 1986 Prelude 2.0 Si?
About 140 hp
