0
Ok, I got it myself. It is the standard horseshoe clip, but it was almost out of sight, closer to the handle, not towards the door door. I expected it to be visible so that you could actually push it off. NOT! Once I could see it I could then find a way to push it off. I had to take a coat hanger and flatten out the end of a straight section with a slight bend right near the tip. This gave me the angle to get at the clip. I found that the handle side of the crank was where to look. When I could not locate the clip on the drivers door I tried several of the other doors until I spotted the sneaky thing. I used a flat head screwdriver to hold the panel back, and a LED flashlight to light the way. Led flashlights have a smoother beam and seem to light better. Edit: I still had trouble with the other door, the above trick just did not seem to work. Finally tried a thin paint scrapper and pushed on it so to make it bow and to my suprise it knocked the clip right off. I suggest that if you think that you might need to get back into the door that you leave the plastic washer off. It does not seem to be needed for anything except to make the fit look tighter. This way you can see the clip and push it off with just about anything.
What else can I help you with?
How do you remove window crank on a 2010 kia rio model?
To remove the window crank on a 2010 Kia Rio, first, locate the retaining clip behind the crank handle. You may need a flathead screwdriver or a specialized tool to gently pry off the clip. Once the clip is removed, pull the crank handle straight off the window regulator shaft. Be sure to handle the components carefully to avoid damage.
Were is the crank shaft position sensor on a 2002 Kia rio?
where is the crank position sensor located on 2003 kia Rio 1.8
How do you remove the transmission on a 2004 Kia Rio?
how do you remove the transmission and cv axles on a 2004 kia rio ?
How do you remove the gas tank from a 2003 Kia Rio?
how to remove the gas tank on a 2003 kia Rio
What puller do you need to remove crank pulley on 04 kia rio?
To remove the crank pulley on a 2004 Kia Rio, you will need a harmonic balancer puller or a crankshaft pulley puller. This specialized tool is designed to grip the pulley securely and apply even pressure to remove it from the crankshaft. Make sure to follow the manufacturer's instructions for proper use to avoid damaging the pulley or surrounding components.
How do you remove the piston from the rod on a 2003 Kia Rio?
There 2 things how remove piston from the rod and how remove oil ring from the piston? 2003 Kia Rio 1.6L
How do you remove cover to replace brake light on 05 kia Rio cinco?
How do you remove cover to replace brake light on 57 kia Rio
How do you remove a radio from a 2006 Kia Rio?
To remove a radio from a 2006 Kia Rio, you need to disconnect the negative battery terminal. Next, remove the upper panel and the mounting screws.
How do you remove back seat of Kia Rio?
Removing the back seat in the Kia Rio is simple. Remove the screws or bolts from the lower cushion and remove cushion. Then remove the now visible screws and remove the remaining parts.
How do you remove the front door panel on a Kia Rio?
With a crowbar.
Is the crank-pulley bolt on a 2002 Kia Rio 1.5ltr reverse threaded?
NO, IT'S JUST VERY TIGHT.
How to remove rear vent windows on a kia Rio LX 2010?
To remove the rear vent windows on a 2010 Kia Rio LX, you'll first need to detach the interior trim panel by removing any screws and carefully prying it off. Once the trim is off, locate the clips or screws securing the vent window. Carefully remove them and use a flat tool to gently pry the window away from the frame. Be cautious to avoid breaking the glass during the process.
