How do you replace 2006 Cobalt rear turn signal bulb?

Answer 1

Inside the trunk, on either side you will find a velcroed trap door. Pull this open and inside you will see two locking tabs that hold the black plastic mounting for all of the lights inside the rear lens, remove the connector at the bottom by wiggling it back and forth until it disengages. Then remove the mounting by squeezing the protruding tabs towards the cennter, replace the bulb, reseat the mounting and reconnect the bottom electrical connector.

Answer 2

if your talking about the front all you do is remove your headlights or tail lights. if its the front you can also do it just by opening the hood you don't need to remove the lights. but the taillights you need to remove.

Answer 3

Pull the carpeting back in the trunk by the light that needs replaced and there are 3 or 4 twist nuts that have to come off and then the complete rear light assembly will come out and you can replace the bulbs.

Answer 4

There are four screws you need to remove in order to pull the headlight assembly to gain access to the individual lamp sockets. You'll need to pull the headlamp connector in order to turn the directional lamp's socket CCW in order to remove it from the headlight assembly.

Scale 1:10 this is a 2