To replace the gas filler tube on a Geo Prizm, start by disconnecting the negative battery terminal for safety. Remove any components obstructing access to the filler tube, such as the rear bumper or wheel well liners if necessary. Disconnect the old filler tube from the gas tank and the body of the car, then install the new filler tube by reversing the removal process. Finally, ensure all connections are secure and reassemble any removed components before reconnecting the battery.
take the fuel lid door off and thake the filler tube up the pump is at the bottom of the fill tube tht is where you put your gas in
You can not. You have to remove the filler tube and drain from there.
no
why does the gas keep backing up the filler tube when pumping gas in my 1998 intrigue
tank full maybe, i suppose the filler tube could be blocked or the filler tube little door is jammed. Will the gas pump knozzle even go in ?
Though the filler neck, no. With filler neck/tube removed from tank you can.
The gas (or fuel) filler-neck (or tube).
yes
The rust won't stop there, and welding a new filler neck on a gas tank is fairly dangerous. Replace the whole thing. It's both safer and more effective. If the tank is plastic you should be able to replace the filler tube without any problems.
That would depend on whether the engine is 2-stroke or 4-stroke (aka 2-cycle & 4-cycle). If the engine does not have an oil filler tube, it is a 2-stroke and oil must be added to the fuel. If it has an oil filler tube, it is a 4-stroke and oil is added through the filler tube.
any parts store, salvage yard, or junk yard
The fuel tank vent or the filler tube is blocked.