No tools required. Raise the hood. On the backside of the core support there will be two plastic strips behind each headlamp assembly. Pull upward on the strips for the affected assembly. When they disengage, pull slightly upward and outward on the assembly. Unplug wiring as desired and replace bulbs or the entire assembly. Headlight bulbs are 9005 and 9006's. To reinstall engage the lower tabs of the assembly in the slots in the core support, then push the two prongs through the square hole. Reinstall the strips and close the hood.
how do you replace headlight bulb in a 2001 celica gts
Are you asking how to replace the entire headlight assembly -OR- how to replace just the headlight bulb? Just the bulb.
If its anything like my 04 sonoma, there should be two flat pins which hold the headlight assembly in place. the pins come out, the socket for the bulbs become acessible. twist out and replace. .
beat the car with a bat
open the hood and pull out the bulb
To replace the headlight bulb on a 2001 Cadillac DeVille, first, open the hood and locate the headlight assembly. Turn the headlight bulb socket counterclockwise to remove it. Gently pull out the old bulb and insert the new bulb, taking care not to touch the glass with your fingers. Finally, reinsert the socket into the headlight assembly and turn it clockwise to secure it.
Replace headlight bulb only when blown.
To replace the headlight bulbs in a 2001 Acura CL, first, open the hood and locate the headlight assembly. For the bulb you need to replace, twist the bulb socket counterclockwise to remove it, then pull out the old bulb. Insert the new bulb into the socket without touching the glass, twist it clockwise to secure it, and reconnect the wiring. Finally, test the headlight to ensure it’s working properly before closing the hood.
On older vehicles you replace the entire headlight. On the newer vehicles you just replace the bulb unless the headlight assembly is damaged.
Open Hood. Remove the cover from the headlight by prying up the keeper. Remove the metric 13 nuts holding the headlight in. Take out headlight and replace the bulb. Reinstall the headlight and reinstall headlight and cover.
To replace the headlight in a 2001 Mitsubishi Galant, first, open the hood and locate the headlight assembly. Remove the screws or clips securing the assembly, then carefully pull it out. Disconnect the wiring harness from the old bulb and replace it with a new headlight bulb, ensuring not to touch the glass with bare hands. Finally, reassemble the headlight assembly and secure it back in place.
http://www.bombaydigital.com/boxster/projects/headlamp/