* Remove the shift lever knob,console and shift boot * Disconnect the shift and select cables from the shift control assembly * Remove the large shift cable retainer plate and detach the cables from their bracket on the shift control assembly base * Remove the shift control assembly retaining nuts and remove the shift control assembly
The shifter knob on a 1995 Chevy Cavalier is thread on. To remove it just spin the knob counter clockwise until it comes off.
automatic or manual?
if you have some recent work done i would check to see if the shifter handle was bolted back one correctly,
To fix a loose gear shifter on a 1995 Ford Econoline, first, check the shifter's mounting bolts under the dashboard to ensure they are tight. If the shifter feels loose due to worn bushings, you may need to replace the bushings in the shifter linkage. Additionally, inspect the linkage for any damage or wear, and adjust or replace components as necessary. Finally, reassemble and test the shifter to ensure it functions properly.
To replace the 4x4 shifter cable on a 1995 Kawasaki Mule 2510, first, disconnect the battery for safety. Remove the old cable by detaching it from both the shifter lever and the transfer case. Install the new cable by securing it to the shifter lever and connecting it to the transfer case, ensuring it is properly adjusted. Finally, reconnect the battery and test the shifter to ensure it operates smoothly.
you can remove the shifter base from the tranny and pour in through there
Need instructions on how to replace a manual window regulator on drivers side on 1995 saturn
Get the Haynes/Chiltons manual. It should be there. Or go to the automotiveforums.com website.
Yes, you most certainly can. Just don't try it with a transmission from a 1.3L - you'll be missing the shifter brace!
How do replace the ignition switch on 1995 Honda Civic EX with a manual tranny. I was wondering if it is pretty much the same as the 1995 Accord.
Remove the head and replace the gasket. No other way to fix it.
You have to pull the driveshaft then the transfer case,for 4-wheel drive.Remove the shifter to the top of transmission and the 4-wheel drive shifter, all connections,Support the transmission disconnect the slave cylinder hose at the slave cylinder.Pull the transmission.You will then see the slave cylinder and throw out bearing. Get a shop manual for details