Caution:On models equipped with Delco-Loc 2 or Theftlock audio systems make sure you have activation code * Disconnect the negative battery cable * Drain the cooling system * Disable the airbag system.Disconnect the forward discriminating sensor harness from the front fenderwell.It may be necessary to remove the hood latch mechanism in conjunction with the airbag sensor and secure them together and out of the way during the radiator removal * Remove the cooling fan assembly * Disconnect the upper and lower radiator hoses from the radiator then disconnect the coolant recovery hoses at the radiator neck * Remove the automatic transaxle cooler lines if equipped from the left tank of the radiator * Remove the hood latch support from the upper tie bar on the front of the engine compartment * Remove the right and left headlight assemblies from the vehicle * Remove the condensar mounting bolts from the radiator assembly * Remove the tie bar (crossbeam) from the engine compartment * The radiator can be removed from the top with some wiggling to clear various components
Yes.
GM doesn't use inertia switches.
hi, i need to know how to replace the heater core with a/c on a 1994 gmc jimmy. a diagram would be helpful
I need info on replacing a fuel filter in the carb of a 1985 GM jimmy 4 wheel drive
for what car? 2000 gm s15
Remove the dash on the passenger side. Good luck, this is not an easy job.
How to replace passenger side view mirror on 2000 GMC Yukon?
The v8 engine 2002 GMC Jimmy 6 cylinders can be replaced with the GM Vortec 4200 straight-6 engine.
if its a 1996 there was a recall on that call a gm garage adn ask .............
No there is not.
Cooling lines from transmission to radiator?
bottom driver side. access from top of radiator.