answersLogoWhite

0

Get the right cable. Some Sears kits come with two cables. You may need one with the spring if you are wondering where to attach the cable and you do not see any hookups. At the end of the cable, there is retainer that goes in the metal non-moving belt-keeper. The rest of the cable and spring at the end goes under the 90 degrees straight down to the little tab on the leaver that is part of the transmission. Spring needs to be attached to that tab, You must clean the grass to be able to see it. It's tiny whole and hard to see. When you pull the cable, you are just lifting the whole transmission up and increasing the tension on the V-belt. That's how it works. The spring must go in that tab with no obstruction under the perfect angle. ( If it's tipped to one side, just take spring out and put it back on another side of the leaver. On my model the right way is to insert the spring from inside out when you face the mower.). This may sound confusing, but it's not that complicated when you see that little tab at the end. If your cable broke, it's possible that you lost the spring and your cable ends where you see that retainer on the belt keeper. If that's the case you just need cable with the spring and in my case that was part number 400292 (comes with two different cables and one has a spring on it).

I could not find any instructions on this and part from Sears comes with no instruction. Warning: The drive cable is fragile and can break. Make sure you do not bend it!

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What kind of oil for a Craftsman 190 cc front propelled lawn mower?

Any 2-stroke mower type will serve.


How do you remove the oil drain plug on a craftsman eager-1 self-propelled 6.75 lawn mower?

The best way to change the oil on a Craftsman Eager One lawn mower - 6.75 HP is to buy a Toro.


How do you replace craftsman mower deck spindle bearings?

One can look in the owners manual of the Craftsman mower to learn how to replace the spindle bearings. Another way the spindle bearings can be replaced is to take it to a lawnmower professional.


How do you install a cable clutch on a craftsman riding mower?

To install a cable clutch on a Craftsman riding mower, first, ensure the mower is turned off and the battery is disconnected for safety. Remove the old cable by detaching it from the clutch lever and the engagement bracket. Then, route the new cable through the appropriate guides and attach it to the clutch lever and engagement bracket securely. Finally, adjust the cable tension as needed and reconnect the battery before testing the operation.


How do you remove the gas tank on a 1998 6.75 hp self propelled craftsman lawn mower?

To remove the gas tank on a 1998 6.75 hp self-propelled Craftsman lawn mower, first ensure the mower is turned off and cool. Disconnect the fuel line from the tank, being cautious to catch any spilled fuel. Next, remove any screws or bolts securing the tank to the mower's frame, and carefully lift the tank away from the mower. Make sure to handle any attached components gently to avoid damage.


Where is the oil drain on a craftsman lawnmower?

If its a push lawn mower. It has no oil release. The mower burns the oil. All you do is replace the oil when it gets low.


Is the craftsman 650 series 917 376742 a self proppelled mower?

Yes, the Craftsman 650 Series 917.376742 is a self-propelled mower. It features a drive system that allows the mower to move forward on its own, making it easier to maneuver while cutting grass. This model typically offers variable speed options for added convenience and control during operation.


How do you tighten a belt on a toro self propelled mower?

No, you can only adjust the tension on the cable by adjusting the clamp on the left side of handle.


Where is the fuel filter on a craftsman lawn mower?

Depends entirely on which craftsman lawn mower you're referring to.


How do you change the front tires on a self propelled Yard Machine mower?

How to Change the Tires on Self-Propelled lawn Mower


How do you change blade retainer on self propelled push mower?

How do you change the blade on a Toro 21" self-propelled mower


Where could Craftsman lawn mower parts be purchased?

You can purchase Craftsman lawn mower parts from the Sears website. Alternatively, you can also find Craftsman lawn mower parts from the Mow Part website.