0
First unhook the cables to the battery and remove the battery and the battery cover. Next press on the clutch pedal and lift the parking brake. Remove the blower, the blade should be all the way down. Remove transmission panel, it should just unscrew and give you better access to drive belt. Disconnect the idle spring, it'll a be located on a bracket on the back by the rear tire. Make sure to use proper tools. Once you remove the idle spring you will have access to the driver belt. Remove old one, replace with new one and reassemble.
What else can I help you with?
How do you replace drive belt on toro 22 rotary mower model no 38435?
A Toro 38435 is a snowthrower manufactured from 1997 to 1999.
How do you remove a spark plug wire on a toro lawn mower?
how to replace plug wire on a toro mower
How do you ajust drive belts on Toro Super Recycler Personal Pace Mowers?
There is a way to adjust drive belts on Toro Super Recycler Personal Pace Mowers. This can be done by greasing the belts. This will make them slower or faster.
How do you replace a drive belt on a forty two inch TORO mower?
You will need to remove the cutting deck to get to the blades. Here you will find the drive belt, which you just slip off.
How do you replace the drive belt toro xl500 ridding lawn mower?
To replace the drive belt on a Toro XL500 riding lawn mower, first ensure the mower is turned off and disconnect the battery for safety. Remove the deck by detaching the necessary pins and bolts, then take off the old belt from the pulleys. Install the new belt by threading it through the appropriate pulleys, ensuring it is properly aligned. Finally, reattach the deck and reconnect the battery before testing the mower.
How do i change the Drive belt on toro lx 420?
To change the drive belt on a Toro LX 420, first, ensure the mower is turned off and disconnected from the power source. Remove the mower deck by releasing the retaining pins and disconnecting the belt from the engine pulley. Then, locate the drive belt, remove it from the pulleys, and replace it with the new belt, ensuring it is properly routed. Finally, reattach the mower deck and reconnect the power source before testing the mower.
Toro GTS 6.5 horse mower drive belt part number?
115-4669
Toro Mower Parts?
form_title= Toro Mower Parts form_header= Lawn maintenance is difficult. Use a Toro mower. What is the model number for your mower?*= _ [50] Is your mower covered under warranty?*= () Yes () No What parts do you need?*= _ [50]
Toro Parts?
form_title= Toro Parts form_header= Use a Toro mower for your lawn. What is the model number for your mower?*= _ [50] Is your mower covered under warranty?*= () Yes () No What parts do you need?*= _ [50]
What is the cost of a toro mower?
Depending on the model of the Toro mower you choose, they average around $280 and go up to $580 for a push mower. Riding lawn mowers by Toro are several thousand.
Toro Lawn Mower?
form_title= Toro Lawn Mower form_header= Keep your lawn beautiful with a Toro lawn mower. What is the square footage of your yard?*= _ [50] Is your lawn level?*= () Yes () No Do you want to buy an extended warranty?*= () Yes () No
How do you replace belts on 521 toro snowblower?
To replace the belts on a Toro 521 snowblower, first, disconnect the spark plug wire for safety. Remove the plastic cover or housing to access the belts, typically secured with screws or clips. Carefully remove the old belts, noting their routing, and install the new belts in the same configuration. Finally, reassemble the cover, reconnect the spark plug wire, and test the snowblower to ensure proper operation.
