The same way you do any macpherson strut assembly...
If you aren't familiar with the procedure, take it to a professional. Spring/strut assemblies can be dangerous if not serviced properly.
1991 mercury cougars use shocks and struts
The contour had MacPherson struts in the front.
The front struts on a Mercury Sable are replaced by jacking up the vehicle, removing the wheels, and supporting the vehicle on jack stands. The retaining bolts can then be removed, the struts taken out, and new struts put in place.
Check out autozone.com's repair guides online, under suspension, they have a good guide for doing it.
It has macpherson struts in the front and torsion springs at the rear.
When replacing struts, ALWAYS replace them in pairs.
hou to replace rear struts
Compress the shock spring with a spring compressor. Remove the top strut bolt. Remove the bottom strut bolt. Reverse the process to install the new struts.
The MacPherson strut is a type of car suspension system which uses the axis of a telescopic damper as the upper steering pivot. It is widely used in modern vehicles and named after Earle S. MacPherson, who developed the design.
Wat struts
Yes. All cars have struts in the front and shocks in the rear. However, it does not have McPherson struts
Struts on the front , but motorcraft.com lists shocks and struts for the back ( I'm confused ! )