To replace the rear shocks on a 2001 Chrysler LHS, start by safely lifting the rear of the vehicle and securing it on jack stands. Remove the rear wheels to access the shock absorbers, then unbolt the lower shock mount and the upper mount in the trunk or rear seat area. Once the old shocks are removed, install the new shocks by reversing the removal process, ensuring all bolts are tightened to the manufacturer's specifications. Finally, reattach the wheels and lower the vehicle back to the ground.
They bolt in and out easily.
Oh, absolutely, friend! You can replace rear air shocks with gas shocks on your 1991 Chrysler New Yorker Fifth Avenue. Just make sure to choose shocks that are compatible with your vehicle's make and model. Take your time, enjoy the process, and soon your car will be riding smoothly again.
How do you replace rear shocks on a 2003 altima?
you buy a new one
how to replace rear shocks on a 1994 acura legend coupe
As of 2014, there are a few places where one can get rear shocks for a 1994 Chrysler New Yorker with air ride. This can be purchased at Auto Zone and O'Reilly's.
If you replace the manual leveling shocks on the rear with regular shocks you also have to replace the rear coil springs with stiffer ones. Use gm part #15182559 or bilstein part #199021 to replace the coil springs. The coil springs that come with the manual leveling shocks are not stiff enough to use with regular shocks, causing the rear end to droop.
The rear shocks on a Pontiac G6 are replaced by supporting the rear axle on jack stands, removing the wheels, and unbolting the shocks. New shocks can then be put in place and bolted on.
The 2001 Buick LeSabre rear shocks are held in place with a retaining bolt on each end of the shock. Remove the retaining bolts and the old shocks will come off. Reverse the process to install your new rear shocks.
rear front or rear?
Shocks = $50 plus labor.
The 2001 Chrysler Town-AND-Country has 64.8 in. of rear shoulder room.