www.sunvisordepot.com.they are great!
To remove and replace the driver-side mirror on a 2001 Toyota Camry, start by carefully prying off the plastic cover at the base of the mirror to expose the mounting screws. Use a socket wrench to remove the screws securing the mirror to the door. Disconnect the electrical connector if your mirror is powered, then pull the mirror off. To install the new mirror, reverse the process: connect the electrical plug, secure the mirror with screws, and replace the plastic cover.
if the frame of the mirror is still there, then buy a mirror that sticks on and cover the broken mirror. buy this at auto store or bigger retail stores.
* Remove the mirror trim cover from the door panel * Remove the three mirror retaining nuts and detach the mirror from the car
To replace the driver's side mirror on the 2003 GMC Envoy, first remove the interior door panel. Then, remove the mirror connection cover inside the panel as well. Unscrew the screws holding the mirror to the door. Remove the wiring and replace the mirror with a new mirror. Replace the screws and place the door panel back onto the door.
To replace a mirror in a Toyota vehicle, first, the negative cable of the battery should be disconnected. Then, the mirror cover should be removed from the door panel carefully, and the wiring disconnected so the mirror can be replaced.
To replace the rearview mirror in a 1999 Acura RL, first, remove the plastic cover at the base of the mirror by gently prying it off. Next, unscrew the mirror from its mount using a Phillips screwdriver. Install the new mirror by aligning it with the mount and securing it with the screw. Finally, reattach the plastic cover for a finished look.
A Honda Civic rear view mirror is held in place by screws. To see the screws remove the plastic cover. Loosen all the screws and the mirror will drop down. Replace with a new unit.
You have to remove door panel to get access to the screws holding the inside plastic cover in place. Remove the plastic cover and then the three nuts holding the mirror.
to replace the right side door mirror on the 1992 Chrysler New Yorker, first remove the interior door panel. Then, remove the access cover at the base of the mirror inside the door. Then, remove the three bolts and the wiring that holds the mirror in place. You can then attach the wiring to the new mirror and housing, and then bolt it into place on the door. Replace the access cover and the door panel.
Remove the plastic cover on the inside behind the mirror and then remove the three nuts holding ther mirror on. When you pull out the mirror unclip the wiring harness.
Remove the air filter housing cover. The air filter will lift out. Drop the new air filter into the housing and replace the cover.
The small plastic cover in the corner of the window is removable. Mirror mounting fasteners and wiring connections can be removed to remove mirror.