The 2001 Plymouth Neon has either hook-end or 1/4" side lock attachments on the wiper arms. Both are extremely easy to install wipers on. Make sure you get the right replacement wiper blades with the correct lengths (22" drivers side and 19" passenger side) as well as attachments (for hook or 1/4" side pin). Be sure to always lookup the exact part numbers for the brand of wipers you decide to purchase by asking the clerk, using the book, or by looking it up online. This not only ensures the correct lengths but also the correct attachments. See related links below.
It is under the wiper arms.It is under the wiper arms.
Remove wiper arm then remove inside trim panel being careful not to crack it then remove motor connection then motor
It is on the bottom of the fluid reservoir.
24 inches
The wiper motor is under the plastic cowl, at the base of the windshield.
where can you get an illistration of windshield wiper attachment to the electrical motor for Chrysler 5th avenue
How to replace wiper motor on a 1998 montero sport mitsubishi
how do you replace rear wiper motor on a 1997 ford explorer
To replace the wiper linkage bearing on a 1985 Chrysler 5th Avenue, first, remove the wiper arms by loosening the nuts and lifting them off the shafts. Next, detach the wiper motor and linkage assembly from the vehicle by unscrewing the mounting bolts. Carefully remove the old bearing from the linkage, then insert the new bearing, ensuring it's properly seated. Reassemble the linkage and wiper motor, and reattach the wiper arms to complete the repair.
Remove the wiring harness from the wiper motor. Remove the windshield wiper arm from the wiper motor. Remove the wiper motor retaining screws. Reverse the process to install the new wiper motor.
The wiper cowl is the area at the base of the windshield that houses the wiper motor.
how do you replace a wiper motor in a 2000 jetta?