1. Turn Switch --#2 Position.(just Before Start)
2. Press Odometer Button Twice.
3. Turn Switch --0 (off)
4. Press And Hold Odometer Button
5. Turn Switch--#2 Position
6. Continue To Hold Odometer Button Until Signal & 10k Will Appear.
YES!!!!!!!!!!!
Instructions for resetting the FSS are in the Owner's Manual.
If you reset oil life without changing the oil you will throw it off schedule.
push the break pedal 3 times to reset the computer
The 1999 Mercedes ML320 typically requires about 8 quarts of engine oil when changing the oil and replacing the oil filter. It's important to use the recommended oil type, which is usually a synthetic 5W-40 oil. Always check the owner's manual for specific recommendations and guidelines.
Try disconnecting the battery. Make sure you have the security code for your radio first.
press and hold the reset button on the dash panel
To reset the oil life indicator on a Camry XLE after changing the oil, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and start the engine to verify that the oil life indicator has reset to 100%.
Click the link.
Just changing the oil doesn't do anything to the gauge, hold reset button down until readout changes change the oil
Yes its a good oil but is the Mercedes ml320 a good car
how to reset display screen after changing oil at 15000 miles. this is on a 2008 highlander.