1. Switch the Ignition Off
2. Press and hold the tripmeter (mileage reset) button on the dash
3. Now switch the ignition to the ON position
4. Keep the button pressed for 10 seconds
5. The display will read '0' and the service symbol will extinguish.
how do you reset remote central locking peugeot partner
It should say in your handbook.
The service light is a little spanner which stays illuminated on main display on start up of the engine, this is a simple reset if home servicing and no diagnostic plug in from dealer necessary.Procedure to Reset Peugeot Service Light as follows:1. Switch the Ignition Off2. Press and hold the trip meter (mileage reset) button on the dash3. Now switch the ignition to the ON position4. Keep the button pressed for 10 seconds5. The display will read '0' and the service symbol will extinguish. Works on most models of manufacturer, for example.Peugeot106(1999 on)Peugeot 206 (1998 on)Peugeot306(1996 on)Peugeot307(1996 on)Peugeot406(1998 on)Peugeot607(2000 on)Peugeot806(1999 on)Peugeot Expert (1999 on)Peugeot 807 (2002 on)Peugeot Partner (1999 on)Peugeot Boxer (2002 on)
hold mileage reset button then insert key and turn on ignition while still holding milege reset button . contine holding while counter counts down from 10
u must turn ignition key from off position just one click while pushing down the trip button located near to miliage this should start a count down from ten on the miles counter once on zero it will be reset
it is due a service and the garage can reset the light
Press day-counter and then turn on the ignition key. You will the 10 seconds countdown (where you normally see the mileage counter). After the countdown the reset is completed.
The immobilizer on a Peugeot 207 can be reset by removing it and reinstalling. Another option is to install a new reader.
Hold in the oddometer reset stalk then turn the key into the on position, without starting. Then watch it count down to zero on the display and reset to 20k
No one has reset your maintenance reminder. Contact either the vehicle manufacturer to see how to reset it or stop in a oil change business to have them tell you how to reset it. If your "Service G" has not been done, you need to find out what is needed and have it done. They will then reset the counter.
Turn ignition off press and hold mileometer reset button. Turn ignition on, Service timer starts countdown to zero, Turn ignition off, release reset button, Turn ignition back on. It should now have reset the service miles. This worked on a 306 try it, it might work on a 406. Hope this is of some help.
To reset the service spanner light on a Peugeot 206, you need to turn on the ignition without starting the engine. Press and hold the trip reset button on the dashboard, then turn the ignition off and back on while continuing to hold the button. After a few seconds, the light should reset and turn off. Release the button, and the service light should be gone. If it persists, consult your vehicle manual or a professional for further assistance.