we can separate the mixtures by use of separating funnel in which the denser liquid goes off through the funnel.i.e.,water goes off first ,simply because it is denser than oil,followed by the denser liquid and finally the less dense liquid can be sopped in the separating funnel and collected in a different container.
NB;when collecting each of the liquids,a separate container should be used.
Yes as The amount of emulsifier in the mixture of water and oil is increased the time taken for the oil and water to separate is increased.
First, use a funnel to separate the sand and sugar from the oil and water mixture. Then, you can use a separation technique such as decantation or centrifugation to separate the oil from the water. Finally, you can use a process like distillation or filtration to separate the oil from the water.
As the amount of emulsifier increases the time taken for the mixture of oil and water to separate will also increase. It is directly proportional.
Allow the mixture to sit until the oil and water have separated. Then pour off the oil.
You can separate a mixture of kerosene oil and water using the method of decantation. Allow the mixture to sit undisturbed until the two liquids separate into distinct layers. Then carefully pour off the kerosene oil layer, leaving the water behind.
Distillation.
One method to separate oil and water using a machine is by employing a centrifuge. The centrifuge spins the mixture at high speeds, causing the oil and water to separate due to their different densities. The separated layers can then be collected and extracted individually.
An example of a two-phase mixture is oil and water. To separate the substances, you can use a method called decantation, where the mixture is left to settle and the oil, being less dense, will float on top of the water. The oil can then be carefully poured off, separating it from the water.
the answer is extraction. represent
The most simple methods are decantation and filtration.
One way to separate oil from water is by using a separating funnel. Since oil is less dense than water, it will float on top. By allowing the mixture to sit undisturbed in the funnel, the oil can be easily drained out from the top layer. Another method is to use a process called centrifugation, where the mixture is spun at high speeds to force the oil and water to separate based on their different densities.
Oils can be isolated in water using techniques such as solvent extraction or centrifugation. Solvent extraction involves adding a solvent to the mixture of oil and water to separate the oil from water. Centrifugation involves spinning the mixture at high speeds to separate the oil, which is less dense, from the water.