To set the timing on a 1972 460 cubic inch engine, first ensure the engine is at top dead center (TDC) on the compression stroke for cylinder number one. Next, locate the timing mark on the harmonic balancer and align it with the specified timing degree on the timing tab, typically around 6-12 degrees BTDC for this engine. Finally, loosen the distributor hold-down bolt, rotate the distributor to achieve the desired timing, and retighten the bolt. Always double-check the timing with a timing light after adjustments.
In a 1972 Ford Mustang : Either the 250 cubic inch , inline six cylinder engine , the 302 cubic inch V8 engine , or there were ( 3 ) versions of the 351 cubic inch V8 engine
255bhp.
( .035 inch ) for a 1972 Chevrolet 350 cubic inch V8 engine
one is on the cam gear and the other is on the crank timing belt gear. spark timing is on the crank to the rear of the engine
www . motorcraft . com ( no spaces ) shows : For a 1972 full size Ford with 400 cubic inch V8 engine , a spark plug gap of ( .035 inch )
In a 1994 Ford F-150 : There were ( 3 ) engine choices : The 4.9 liter / 300 cubic inch inline six cylinder which has a gear on the crankshaft that meshes with a gear on the camshaft , so there is no timing belt or timing chain The 5.0 liter V8 / 302 cubic inch that has a timing chain The 5.8 liter V8 / 351 cubic inch that has a timing chain
350 cubic inch ( 5.7 liters / 5700 cc )
On a 1996 Ford F-150 : The 4.9 liter / 300 cubic inch inline six cylinder engine has a gear on the end of the crankshaft that meshes with a gear on the end of the camshaft so it does not use a timing chain or a timing belt The 5.0 liter / 302 cubic inch V8 and the 5.8 liter / 351 cubic inch V8 engines have a timing CHAIN
The 5.0 L ( 302 cubic inch ) V8 engine has 1 timing chain
Yes, Chevrolet has a 347 cubic inch engine. It is also referred to as a 5.7 liter engine.
Using the 1972 Ford Thunderbird as an example : The 460 cubic inch / 7.5 liter V8 engine : ( has spark plugs gapped at .035 inch )
The 1972 Oldsmobile Cutlass typically came with a range of engine options, including a 350 cubic inch (5.7L) V8 as the standard engine. There were also optional engines available, such as the 455 cubic inch (7.5L) V8. The choice of engine could vary based on the specific model and configuration of the Cutlass.