0
What else can I help you with?
Is DK weight smooth yarn 8 ply?
Yes, DK weight (also called double knitting) is 8 ply yarn
Can you knit a 8 ply pattern in 4 ply wool?
The difference between 8-ply and 4-ply wool, can depend on the weight of the plies. Some 3-ply yarns have heavy weight (fatter) plies, which knit up heavy worsted, where 2-ply lace weight yarn plies are much lighter (skinnier) plies that knit up very light/lacy/small.If I were to guess, the 8-ply in question, may have smaller plies than the 4-ply. I think if you double the 4-ply, that would be too much. You should try a gauge swatch using the 4-ply singularly, and maybe adust the needle size.
Can you use a rubber line to splice into a transmission line?
Make sure you use rubber fuel line
What does tire load range mean?
The load range indicates the ply rating of the tire or the number of plys under the tread. A = 2 ply B = 4 ply C = 6 ply D = 8 ply E = 10 ply F = 12 ply G = 14 ply H = 16 ply J = 18 ply L = 20 ply M = 22 ply N = 24 ply This has a direct relation to the Load Index which tells you the weight the tire can carry. The more plys the more weight the tire can carry.
What does non 8 or 10 ply mean for tires?
Non 8 or 10 ply refers to the construction and load capacity of a tire. Tires labeled as non 8 or 10 ply typically have fewer layers of fabric or cords, which can result in a softer ride but reduced load-carrying capacity compared to 8 or 10 ply tires. Consequently, these tires may be better suited for lighter vehicles or applications where maximum load and durability are not critical. Always consider the specific needs of your vehicle when selecting tire ply ratings.
Why is glue on skateboards?
Skateboards are made out of ply's of wood stacked on top of each other most skateboards are either 6 7 or 8 ply boards and to hold those ply's together they use glue.
What does this mean ply ply ply?
It is Plies.
How many pieces of wood are there in a skateboard?
6 Different skateboards have different amounts of wood ply's on them they go from 6 to 8 ply's maybe even 9
How can you hook up an amp to your factory stereo 2007 hhr it has factory amp?
The easiest way is a Line Out Converter. you either splice off the rear speakers or if it was equipped with subwoofer then you can splice into that line. The Line Out Converter just gives you a set of RCAs and then you just hook it all up like normal.
Difference between commercial ply and waterproofed ply?
Commercial ply is stronger than normal ply. Waterproofed ply is waterproofed and commercial ply is stronger but not necessarily waterproof.
Where can you get templates to ply line a ford transit?
You can do it without templates pretty easily, it's just a case of measuring it and making sure you re check all the measurements before you cut the ply.
What is the length of width of a sheet of ply?
a standard piece is 8 x 4 (feet)
