answersLogoWhite

0

This is a complex operation, so first go purchase the service manual from Kawasaki.

Without getting into too much detail start by removing the valve covers, heads and cylinders. Remove the left side engine case which will reveal the stator, flywheel, timing chains, oil pump, etc. Removal of the flywheel will require a special tool (refer to service manual for tool part numbers). Remove the starter, water pump housing and water pump. Remove clutch cover and clutches (special tools required here also). Remove the air deflection shield found behind the front or primary clutch. This shield serves as a retainer for the front cylinder timing chain installation plug....remove this plug. Now remove all timing chains. Remove all crankcase bolts from both sides of the engine. Lay the engine on it's clutch side and remove the left crankcase half.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

When you split a piece of wood with an axe the axe is a simple machine called?

When you split a piece of wood with an axe, the axe is considered a wedge, which is a type of simple machine. A wedge converts a force applied to its blunt end into a splitting force at its sharp edge, allowing it to effectively separate materials. This mechanical advantage makes it easier to split wood compared to using just brute force.


How do you change the oil pump on a 1998 Kawasaki Vulcan 1500?

To change the oil pump, you will need to remove the engine and split the crankcase. The oil pump is inside the crankcase. Oil pump is about $160.00, but many hours of engine tear-down and rebuild. Not recommended for persons with little mechanical ability or tools.


Is your 2.0 split port engine dohc or sohc?

The 2.0 liter Split Port Injection ? ( SPI ) engine is a Single Over Head Cam ( SOHC ) engine


How do you split a pair of scissors in half?

with great force


What is it called when large unstable nuclei split because the electric force is greater than the nuclear force?

When large unstable nuclei split because the electric for is greater than the nuclear force is nuclear decay.


To part or divide by force to split or rive to cut?

cloven


The force required to split a log by using a wedge is less if?

The force required to split a log using a wedge is less if the wedge is sharper and has a steeper angle. Additionally, a larger wedge will require less force compared to a smaller one.


Is a split port engine a single overhead cam or a dual overhead cam?

Its a single cam.. it says " 2.0 Split Cam on the cover of the engine... A dual cam would say " 16V Zetec" on the engine cover.


Is a split engine breather dangerous?

Highly you might die


When large unstable nuclei split because the electric force is greater than the nuclear force is what?

Natural radioactivity.


When large unstable nuclei split because the electric force is greater than the nuclear force this is called?

Nuclear decay


What is it called when nuclear force is greater than the electric force when large unstable nuclei split?

it is called natural radioactivity