0
WARNING: Always wear safety glasses, hearing protection, long pants, and leather gloves when using a chaisaw.
- Place the saw on a firm, stable surface.
- Place your left hand on the top of the engine.
- Move the ignition switch to "ON" and engage the choke.
- Holding the saw firmly with yoy left hand, pull up quickly on the starting cord.
- After about 4 pulls, the engine will fire.
- If the engine dies, turn the choke off and repeat step 4.
- Hold the saw firmly with left hand on the wrap bar and right hand on the trigger handle.
- Rev the saw once or twice to lube the chain and check the chain for slack.
Well if you are asking this question then you should do it with the saw on the ground. Hold the top handle with your left hand. Put your right foot in the "hole" where the trigger is holding the back of the saw on the ground.
Then pull the handle. Make sure you have the saw set to run, full choke and the throttle locked wide open.
When the saw tries to fire the first time, set to half choke and it should start.
When it starts make sure the choke is all the way off. Then let it warm up a minute and go start cutting.
*****DONT CHECK THE CHAIN FOR SLACK WHEN IT IS RUNNING!!!!*****
if you bump the throttle you just lost some fingers!!!!!
What else can I help you with?
What was the movie that start with T?
Twister Terminator Texas Chainsaw Massacre Ten Commandments
How do you start Stihl chainsaw 034 AV Super Quikstop?
press the moo button
What is leatherface's weapon?
He uses a chainsaw, hence Texas chainsaw massacre, but he also uses a machete at some points :in the movie Stan Helsing he uses a leaf blower XD
How can you safely and effectively perform a chainsaw plunge cut?
To safely and effectively perform a chainsaw plunge cut, follow these steps: Wear proper safety gear, including goggles, gloves, and ear protection. Plan your cut carefully, ensuring there are no obstacles in the way. Hold the chainsaw firmly with both hands and position it at a 45-degree angle on the wood. Start the chainsaw and slowly lower it into the wood at the desired angle. Use a steady and controlled motion to make the cut, keeping the chainsaw steady throughout. Once the cut is complete, carefully remove the chainsaw from the wood. Always prioritize safety and caution when using a chainsaw.
Are chainsaw chains universal, or do they vary depending on the brand and model of the chainsaw?
Chainsaw chains are not universal and vary depending on the brand and model of the chainsaw. It is important to use the correct chain for your specific chainsaw to ensure proper functioning and safety.
How can I safely and effectively cut wood slices using a chainsaw?
To safely and effectively cut wood slices using a chainsaw, follow these steps: Wear protective gear such as goggles, gloves, and ear protection. Choose a stable work surface and secure the wood in place. Start the chainsaw and hold it with both hands, keeping a firm grip. Make slow and steady cuts, letting the chainsaw do the work. Avoid cutting through knots or nails, as they can damage the chainsaw. Take breaks to prevent fatigue and maintain focus. Clean and maintain your chainsaw regularly for optimal performance.
How do you make chainsaw in alchemy game?
axe+electricity=chainsaw
How do you get a free hat from sthil chainsaw co?
Buy a chainsaw...
When did Chainsaw Kittens end?
Chainsaw Kittens ended in 2000.
When was Chainsaw Kittens created?
Chainsaw Kittens was created in 1989.
When was Daisy Chainsaw created?
Daisy Chainsaw was created in 1995.
When was Chainsaw Scumfuck created?
Chainsaw Scumfuck was created in 1988.
