0
What else can I help you with?
What are the best practices for using two part epoxy for concrete projects?
When using two-part epoxy for concrete projects, it is important to follow these best practices: Thoroughly clean and prepare the concrete surface before applying the epoxy. Mix the two parts of the epoxy according to the manufacturer's instructions. Apply the epoxy evenly and smoothly using a brush or roller. Allow the epoxy to cure for the recommended time before subjecting it to heavy use or traffic. Consider using a topcoat or sealer to protect the epoxy and enhance its durability.
Concrete Sealer?
form_title= Concrete Sealer form_header= Seal all the projects in your home with concrete sealer. What is the sealer for?*= _ [50] How much sealer do you need?*= _ [50] Have you ever used sealer?*= () Yes () No
Will concrete sealer work on asphalt?
My driveway has a ton of cracks in it, and I bought some concrete sealer, but my driveway is asphalt! Will the concrete sealer still work with asphalt?
What are the best concrete sealers?
As of 2014 there are many top rated concrete sealers on the market. Some of the best include Eagle concrete sealer, Armor SX5000 concrete sealer, and Thoro T1956 concrete sealer.
What is the best moisture barrier for a concrete floor?
The best moisture barrier for a concrete floor is a high-quality epoxy coating or a polyurethane sealer. These products create a protective layer that prevents moisture from seeping into the concrete, helping to maintain the integrity and longevity of the floor.
What is epoxy mortar?
Epoxy resins are used with aggregate (silica sand) to produce epoxy mortar or epoxy concrete, which is used for structural repairs of concrete.
Can you put epoxy over sealer on a overlayed concrete floor?
Yes there are certain kinds of epoxies that can be applied over SOME sealed floors. It depends on what type of sealer was used first. They tend to not bond well with some solvent sealers, but water based ones will work. You just have to use the right epoxy primer so it will bond
What are the best practices for applying 2 part concrete epoxy to ensure a durable and long-lasting finish?
To ensure a durable and long-lasting finish when applying 2-part concrete epoxy, follow these best practices: Thoroughly clean and prepare the concrete surface before application. Mix the epoxy components according to the manufacturer's instructions. Apply the epoxy evenly and smoothly using a roller or brush. Allow the epoxy to cure completely before subjecting it to heavy traffic or use. Consider applying a topcoat or sealer for added protection and longevity.
What is concrete sealer used for?
I've heard of concrete sealer but don't know exactly what it is. What is it used for?
What exactly is concrete sealer?
What exactly is concrete sealer? What does it consist of and is it safe to use at home, indoors?
Is sealer required over garage floor epoxy paint with color chips?
You don't normally need sealer over epoxy, but the colour chips may be a reason to. I would check the can for comments on this.
Can you put epoxy concrete sealer over acrylic sealer?
Of course you can. You can also scribble a mustache under the nose of a Picasso painting and use dirt as a condiment for your hotdog but none of these are good ideas. The question isn't one of whether or not it can be done but, what the chances of long-term adhesion are between the acrylic sealer and the epoxy coating.As far as the two materials are concerned, it's really a pretty generic question because both epoxy coatings and acrylic sealers come in a multitude of different varieties and formulations. So, the answer will have to be equally generic.First and foremost, any run-of-the-mill epoxy (bis-A, bis-F, novolac, water, solvent or 100% solids, etc.) will adhere, to one degree or another, to a clean, contaminant-free polymer treated surface as long as the formulation, mixing and application are done correctly. The chances of a higher rate of adhesion increase when a profiled surface (increased surface area) is available.However, in the same way that a concrete foundation designed and poured to support a single-story residential home isn't well suited to support the weight and movement dynamics of a ten story building, a single-component acrylic sealer isn't well suited to act as the foundation for a two-component crosslinking epoxy. The long and the short of why this is true is simple:Acrylic sealers typically have a solids content of between 20-30%.This means that once the carrier (which is usually water or solvent), that makes up the counterpart to the solids content (70-80%) has evaporated, the solids are what remain on the surface as the dried sealer.When examined microscopically, the solid particles appear as individual and independent specks.Conversely, all two-component epoxies crosslink forming carbon chains, which make the epoxy coating a single sheet (like a roll of plastic) once it's cured.When exposed to enough stress (think foot or wheeled traffic) the individual solid acrylic particles can act as an epoxy bond breaker because they inhibit the epoxy coating from making full contact with the surface that it's intended to protect.In summary, although it's not recommended and assuming the sealer is in tact, if an epoxy is going to be used to coat an existing acrylic sealer (for whatever reason), it would be best to use either a 100% solids or a water-based epoxy to avoid any possible attack from an epoxy containing solvent.With all this said, the best approach is to fully strip and eliminate the sealer so that the epoxy coating can have access to a well prepared, open and porous surface.
