Some chains are looped together using a special quck-connect link that can be opened by hand, or with the aid of a vise grip or any other multi-purpose plier. Other chains are stuck together using either the ordinary pins in the chain, or a special connecting pin. In that case it's simplest to use a dedicated tool called a chain breaker to get the chain off. If you're skilled and a bit desperate a hammer and a punch may be used. Of course if you're getting the chain off to discard it even an angle grinder or crude violence will do the trick. Break it sideways and it should open.
It is a sport were you ride down a mountain and take jumps on a bike.
Steal it or get a five finger discount.
If your mongoose bike gear shifter is not working properly, you should first check for any visible damage or debris that may be causing the issue. If everything looks okay, try adjusting the tension of the shifter cable. If the problem persists, it may be best to take your bike to a professional bike mechanic for further inspection and repair.
buy a cheap bike then buy a good chain saw then take the chain saw apart then stay with the motor and get the chain of the bike and conect it to the motor then put gas in the motor then have fun.JUST BE CAREful
Any where form $50-$100, give or take.
To shorten a bike chain, you will need a chain tool to push out the pin holding the links together. Once the pin is removed, you can take out the excess links and reattach the chain by pushing the pin back in. Be sure to properly size the chain before reattaching it to ensure a proper fit.
After a lot of miles, yes, you do need to change the chain. Take it to a bike shop and they have a special tool to check if your chain needs to be replaced.
To learn how to whip a mountain bike, you can start by practicing on a safe and open trail or bike park. Focus on shifting your body weight and using your arms to control the bike in the air. Watch tutorials or take lessons from experienced riders to improve your technique. Practice regularly and gradually increase the difficulty of your jumps to master the skill of whipping a mountain bike.
loosen the 2 back nuts, then if you are able to pull the wheel back so that it is tight again. if that dosent work buy a chain tensiner (tightener) and take off a link on the chain then put the chain back together and chuk it bak on ya bike!
If you can't find the master link on your bike chain, you can use a chain tool to remove a regular link and create a new master link. Be sure to follow the manufacturer's instructions and take your time to avoid damaging the chain.
i like the mongoose BMX are played out its all about the pegs got to be able to cat walk plus with the mongoose its a tuff bike and can take a beating and keeps on rolling.Mongoose, are probly the worst bmx brand out there, there very very heavy you cant do anything on them, i would recommended alighter bike, like Kink, there a lot
To remove gears from a bike, you will need to first shift the chain onto the smallest chainring and smallest cog. Then, use a chain tool to break the chain and remove it from the bike. Next, use a wrench to loosen the bolts holding the gears in place and carefully remove them from the bike. Make sure to keep track of any washers or spacers that may be present.