answersLogoWhite

0

The toilet can be removed fairly easily.

1. shut off water supply to toilet

2. flush toilet to get most of the water out of the tank and bowl

3. with a cup or a wet-vac remove the remaining water from the bowl

4. remove the water supply line from the toilet (usually on the left side under the tank)

5. remove the 2 nuts from the bolts sticking out of the bottom of the toilet

6. lift the toilet off of the bolts and you're done

The "hole" doesn't need to be removed. Simply cut your vinyl around the flange. be careful not to cut the hole too big so that it is concealed under the toilet when you place it back on the bolts.

You will also need to scrape the wax ring off of the bottom of the toilet and off of the flange on the floor.

You will need to install a new ring when you reinstall your toilet

Hope this helps

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What should you use to remove a stain from a white soft vinyl toilet seat?

Hot water and bleach


How do you fix a hole in a pool without a vinyl repair kit?

You can't ... since the above ground pool is made of vinyl material, you need to apply a vinyl patch. Has to be a like material to be compatible.


Vinyl pool repairs in Houston Tx?

Garrett Vinyl Pools in Houston does a good job and has been around since the 70's.


How can I install vinyl flooring on stairs?

To install vinyl flooring on stairs, you will need to measure and cut the vinyl to fit each step, starting from the bottom and working your way up. Use adhesive to secure the vinyl in place, making sure to press out any air bubbles. Finish by adding stair nosing for a clean and professional look.


What is the cost of adding a bathroom?

In Minnesota, a construction company is adding my bathroom for $8500 including porcelene sink, bathtab, vinyl floor and exhaust. They will have to cut 10ft plubing line in the floor


Do they make toilet seat heaters for the bathroom?

Yes I have found a toilet seat heater on Amazon and is going for $49.95. The brand name is called ToastieTush.It is easy to clean with its wetproof vinyl and has also been UL & CSA listed so its completely safe.


How much sand do you need?

For what? Building a cove for a vinyl liner. Adding sand to a sand filter. Building a sand box. For the base of a pool. ????


How do I go about installing vinyl flooring on stairs?

To install vinyl flooring on stairs, you will need to measure and cut the vinyl to fit each step, starting from the bottom and working your way up. Clean the stairs thoroughly and apply adhesive to the back of the vinyl before pressing it into place. Use a roller to ensure a secure bond. Finish by adding stair nosing for a professional look and added safety.


Can Vinyl Garage Doors be repainted?

Yes, you can repaint a vinyl garage door. However, you can use oil-based or latex-based paints, since they won't work. Visit your local paint store, and ask the salesperson which paint you can use on a vinyl surface.


What do critics say about Taiwanese vinyl blinds?

Critics charge that the Taiwanese vinyl blinds are ecologically unsound, since they will eventually wind up in American landfills and take decades to disintegrate.


How do you clean set diarrhea stains on the seat of a vinyl toilet seat?

To clean set diarrhea stains on a vinyl toilet seat, start by mixing a solution of warm water and mild soap or a gentle disinfectant. Use a soft cloth or sponge to gently scrub the stained area, avoiding abrasive materials that could damage the finish. Rinse the seat with clean water and dry it thoroughly with a towel. For stubborn stains, consider using a diluted solution of vinegar or baking soda, but test it in a small area first to ensure it won't harm the vinyl.


Is bleach safe to use when cleaning vinyl floors?

No, bleach is not recommended for cleaning vinyl floors as it can cause discoloration and damage to the surface. It is best to stick to a manufacturer-recommended cleaner or a mild detergent solution when cleaning vinyl floors.