dont know about the petrol engines but I have a 1.9 tdi and you dont tension it it has an automatic tensioner when set in the correct position puts the correct tension on the belt it is spring loaded I cant remember exactly how it works but you should dor more research into this before attempting to tension a worn belt or changing one as a failed timimng belt can cause massive engine damage
it has a chain not belt
this totally depends on which sharan you have. Is it a diesel or petrol?
To change the timing belt on a VW Sharan 1.9 TDI, first ensure the engine is cold and disconnect the battery. Remove the accessory belts and the timing belt cover to access the timing belt. Align the timing marks on the crankshaft and camshaft, then loosen the tensioner and remove the old belt. Install the new timing belt, ensuring proper tension and alignment with the timing marks, then reassemble the components in reverse order. Always consult the vehicle's service manual for specific torque settings and procedures.
dont know about the petrol engines but I have a 1.9 tdi and you dont tension it it has an automatic tensioner when set in the correct position puts the correct tension on the belt it is spring loaded I cant remember exactly how it works but you should dor more research into this before attempting to tension a worn belt or changing one as a failed timimng belt can cause massive engine damage
To change the camshaft on a 2005 VW Sharan diesel 1.9, first ensure the engine is cool and disconnect the battery. Remove the timing belt cover, and then the timing belt itself by aligning the timing marks. Take off the cylinder head by unscrewing the bolts, and then you can carefully remove the old camshaft. Install the new camshaft by reversing the steps, ensuring proper timing and torque specifications are followed during reassembly.
The water pump on a VW Sharan is typically located at the front of the engine, near the timing belt or timing chain cover, depending on the specific engine configuration. It is usually mounted on the engine block and connected to the cooling system. Accessing the water pump may require removing various engine components, such as the timing belt or serpentine belt, for maintenance or replacement. Always refer to the vehicle's service manual for detailed instructions specific to your model year.
To change the water pump on a VW Sharan, first, ensure the engine is cool and disconnect the battery. Remove any components obstructing access to the water pump, such as the timing belt cover and timing belt if necessary. Drain the coolant, then unbolt and remove the old water pump. Install the new pump with a new gasket, reassemble the components, refill the coolant, and reconnect the battery.
the moment the belt get broken, one of the cylenders will hit one of the valves and break the engine completely and cause a very very big damage to the engine
In a VW Sharan, the water pump is typically located at the front of the engine, near the timing belt or chain, depending on the engine configuration. It is often mounted to the engine block and may require the removal of components like the timing cover or accessory belts for access. Always refer to the specific service manual for your model year for precise details.
Timing belt
The timing belt on a VW Sharan 1.9 TDI (115 PD) should typically be replaced every 60,000 to 80,000 miles, or every 4 to 5 years, whichever comes first. It's essential to refer to the owner's manual for specific recommendations, as intervals can vary based on driving conditions and maintenance history. Regular inspections are also advised to check for signs of wear or damage.
Steps to changing the timing belt on a 2005 VW Jetta Wagon 1.9 TDI?