answersLogoWhite

0

You will need to loosen the clamp bolts on both sides of the rear axle. To do this you will need to first loosen the jam nuts underneath and then loosen the bolts. After this you also need to loosen the bolt above the caliper. You don't need to pull this off, just loosen it so it will be allowed to pivot. Once you've loosened all of these, you can stick a large screwdriver through the slot in the middle of the rear axle housing and turn it until the chain is tight.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you tighten the chain on a 1995 kawasaki Lakota 300?

you tighten it derrr!!


How do you tighten chain on 1994 kawasaki ninja zx11?

How do you tighten chain on 1995 kawasaki ninja zx6r


How do you tighten a chain on a kawasaki lakota?

on the bearing carrier you need to loosen the two bolts that hold it in and take a pipe wrench and ture the carrier, look on the sides of the carrier its bigger on one side and u want to turn it to the bigger side until its tight, then tighten the bolts back up


How do you tighten a chain ATV 150?

how do you tighten a chain on a 150 ATV


How do you tighten a chain on a 2006 polaris sportsman 6x6?

how to tighten the front chain axle


How do you tighten chain on polaris 500 predator?

How do you tighten chain on polaris predator 500?


How do you tighten the drive chain on an 1999zx11?

To tighten the drive chain on a 1999 Kawasaki ZX-11, first, place the motorcycle on a stable stand to ensure safety. Loosen the rear axle nut and then adjust the chain tension by turning the adjustment bolts located on each side of the rear swingarm, ensuring both sides are adjusted evenly. Check the chain tension by measuring the slack; it should be within the manufacturer's specified range. Once adjusted, re-tighten the rear axle nut and double-check the chain tension to ensure it’s correct.


How do you tighten a chain on ATV?

you shorten the chain links


How do you tighten chain on ATV?

you shorten the chain links


How do you tighten a chain in a transfer case?

Cannot tighten, Replacement is the only fix for loose transfer case chain.


How can I tighten a loose bike chain effectively?

To tighten a loose bike chain effectively, first, shift the chain onto the smallest front and rear gears. Then, loosen the rear wheel nuts and pull the wheel back to tighten the chain. Make sure the chain has about half an inch of up and down movement. Finally, tighten the rear wheel nuts securely.


How can I tighten the chain on a bike with gears?

To tighten the chain on a bike with gears, first shift the gears to the smallest chainring and smallest cog. Then, loosen the rear wheel nuts slightly and pull the wheel back to tighten the chain. Make sure the chain is straight and re-tighten the wheel nuts. Check the chain tension by spinning the pedals and adjust as needed.