Always check equipment first to make sure the blades are sharp. brush away the snow that covers they area where the drill is to take place. Adjust the handle height and lean on its top. Apply steady pressure as the auger is turned. It's pushed all the way down into the hole after the ice is broken.
A hand ice auger is a tool that is used to cut a circle hole in the ice for ice fishing and checking ice depths. The hand auger is manual and does not have a motor so the user has to turn it.
Yes, it is possible to make a motorized ice auger using a Homelite gas trimmer motor and the auger from a hand-powered ice auger. You would need to adapt the motor to fit the auger and ensure that the motor has enough power to turn the auger effectively through the ice. It may require some engineering and modifications, but it can be done with the right skills and tools.
an auger
You can use an ice chisel, however.......A good ice auger even a hand unit is the way to go. Cost is under $100. If you really want to ice fish seriously, a gas auger is the way to go. They make even thick ice a breeze.
The best deals to find an auger can be found online. However, that may not be an option for many ice fishermen. Then they would be able to go to a store such as Cabella's or Dick's Sporting Goods and find an ice auger there.
Probably would need some kind of gearbox reduction. A motor of a weedeater would be spinning the auger blade at such a high rpm I think it might bog down as soon as you hit the ice with it. Rotatiller motors have a gearbox reduction on them already. What size cc is the engine?
You can find a Jiffy Ice Auger online at the Jiffy On Ice website. You can also purchase one from personal sellers through websites such as Craigslist or eBay.
85935
To determine the thickness of ice, you can use a tape measure or an ice auger to drill a hole in the ice and measure the distance from the top of the ice to the bottom of the hole. It is important to always check the ice thickness before walking or driving on it to ensure safety.
7 to 5
The site Ice Fish has a readily available user's manual for a particular type of ice auger, which includes instructions on how to set it up and operate it. If one learns best by doing, the best way to learn how to operate an ice auger would be to ask an ice fisherman to demonstrate.
An auger is a carpenter's tool for boring holes larger than is achievable with use of a gimlet.