One tube from the hand pump should be placed inside of the liquid that is to be siphoned. The other tube should be placed in an empty bucket or other container. The pump should then be squeezed and released to move the liquid from the container that it is currently in into the other empty container.
Use a mechanical hand pump.
To use a hand pump siphon, first place the siphon tube into the liquid you wish to transfer, ensuring it reaches the bottom of the container. Next, use the hand pump to create suction by repeatedly squeezing and releasing the pump until the liquid starts flowing through the tube. Once the flow begins, position the other end of the tube in the receiving container, and gravity will continue to draw the liquid through the siphon until the source container is empty or the flow is manually stopped. Always ensure the source container is higher than the receiving container for effective siphoning.
Purchase a mechanical hand pump at almost any auto parts store. They are very inexpensive and safe use.
You can hot wire the fuel pump, or remove the tank and siphon it out of the pump mounting hole.You can hot wire the fuel pump, or remove the tank and siphon it out of the pump mounting hole.
Since that gas tank has no drain plug, that leaves you three options. Use a hose and siphon it out, pump it out, or drop the tank and drain it. You can purchase a small hand pump for very little and pump it out, which is the safest route. If you decide to siphon it out be very careful and do not swallow any fuel. It is deadly and even a small amount in your lungs will kill you.
No drain plug so a good old fashioned siphon hose or hand pump.
Probably, but why bother? Just buy a pump or siphon ready made.
Two, one electric and one siphon pump in the tank.Two, one electric and one siphon pump in the tank.
There is an anti-siphon valve in the filler neck. You can not siphon.
To use a siphon kit on an S10 gas tank, first ensure that the vehicle is off and parked on a level surface. Attach the siphon hose to the siphon pump and insert the other end into the gas tank through the filler neck. Pump the siphon to create a vacuum, allowing the fuel to flow into your container. Monitor the process to avoid overfilling your container and ensure safety precautions are followed due to the flammable nature of gasoline.
When the engine is cold just undo the bottom rad hose and let it drain out or use a cheap hand held siphon pump and remove it from the top of the radiator.
Since that gas tank has no drain plug, that leaves you two options. One, use a hose and siphon it out or two, drop the tank and drain it. Personally, I would siphon it out, it's a lot easier. The problem is how. Purchase a hand pump and long piece of flexible hose, and pump out as much out as possible. Use extreme caution when doing this. Gasoline vapors are highly explosive.