0
Do you want it quick and cheap? Or fantastic and expensive? Cheap: Pull all the spark plugs and spray WD-40 into the cylinders. Turn the motor by hand using the flywheel to articulate it. Do not use the electric start. Before you do this, purchase an winterize kit from your local marina or boating store. There will be an "antifreeze" solution to add to your water pumping system. You will need a tank or garbage can to use it. It will treat the rubber pump parts and seals so they don't crack or dry rot during the winter or from lack of use. Then do the spark plug thing. Then cover the motor with a large plastic bag and this should be sufficient. Expensive?: take it to your local marina or boat mechanic and let him do it!
What else can I help you with?
What is the oil to gas mixture for a 1992 60 hp Johnson outboard motor?
50:1 is the correct mixture for a 1992 Johnson 60 hp outboard.
How old is a Johnson outboard motor serial number G7050973?
How old is a Johnson 60 HP outboard motor serial G7050973
What is the Spark plug for 2006 60 mercury outboard?
The 2006 model, 60 hp Mercury outboard 2 stroke requires a NGK BPZ8H-N-10. The 4 stroke model requires an NGK DCPR7E.
Spark plug gap for 1998 60 hp Johnson?
The 1998 model, 60 hp Johnson outboard runs a plug gap of .030 in.
How much does a 1996 Johnson 60 hp outboard motor weigh?
135 lbs
What is the oil gas mixture for a 1990 60 hp Johnson outboard tiller motor?
For a 1990 60 hp Johnson outboard motor, the recommended oil-gas mixture is typically a 50:1 ratio. This means you should mix 2.6 ounces of two-stroke oil with one gallon of gasoline. Always refer to the owner’s manual for specific recommendations, as variations may exist based on engine condition and usage.
What is the year that a Johnson 60 outboard motor with serial number J5465133 and model number J60ELCIH was made?
1981
What is oil gas mixture for a 1984 Johnson 60 hp motor?
The 1984 model, 60 hp Johnson outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.
1970 60 hp Johnson boat motor gas oil ratio?
The 1970 model, 60 hp Johnson outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.
1971 60 hp Johnson boat motor gas oil ratio?
The 1971 model, 60 hp Johnson outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.
How much does a 1997 2 stroke mercury 150 hp weigh vs a 1995 135 hp mercury outboard motor?
The 1997 Mercury 150 HP 2-stroke outboard motor typically weighs around 460 pounds. In comparison, the 1995 Mercury 135 HP 2-stroke outboard motor weighs approximately 400 pounds. Thus, the 150 HP model is about 60 pounds heavier than the 135 HP version.
What has the author Scott Johnson written?
Scott Johnson has written: 'Clymer Mercury/Mariner Outboard Shop Manual: 75-275 Hp 1994-1997' 'Man to Man When Your Partner Says No' 'The Believer's Way' 'The Caveman Who Lost His Spear ... When They \\' 'Mercury/Mariner: Outboard Shop Manual : 2.5-60 Hp'
